Database.RM.Current.K.Restart.Redo.Hold|Changes are sitting on log but not in database(s) yet

Database.RM.Current.K.UnCommited.Undo.Hold

Changes held back by long running transaction(s)

|Database.RM.Current.MaxChkptScan.msec|(internal)

Database.RM.LastChkpt.Avg.K.Logged.PerTran

The size of transactions

|Database.RM.LastChkpt.Interval.Sec|Time since last checkpoint (Ex. 27 hours. This is an Idle machine)

Database.RM.LastChkpt.K.Logged

Amount logged in Checkpoint interval (usually near Database.RM.Sys.M.Chkpt.Interval)

|Database.RM.LastChkpt.Time|Time of checkpoint

Database.RM.LastChkpt.Total.DBs

Databases open or in DBCache at time of checkpoint

|Database.RM.LastChkpt.Trans|Actual Transactional Logging type transactions (API calls that did DB updates)

Database.RM.Peak.Avg.K.Logged.PerTran

The size of transactions

|Database.RM.Peak.Interval.Sec|Time since last checkpoint

Database.RM.Peak.K.Logged

Amount logged in Checkpoint interval (usually near Database.RM.Sys.M.Chkpt.Interval)

|Database.RM.Peak.Time|PDT Time of checkpoint

Database.RM.Peak.Total.DBs

Databases open or in DBCache at time of checkpoint

|Database.RM.Peak.Trans|Actual Transactional Logging type transactions (API calls that did database updates)

Database.RM.Peak.Trans.PerMin

Transactions/Min

|Database.RM.Restart.Duration.Sec|Time to apply the incomplete changes after a crash (in seconds)

Database.RM.Restart.K.Applied

Amount of incomplete changes detected and applied in KB (Ex. 22MB in 33 sec.)

|Database.RM.Restart.Time|PDT Time the server was started

Database.RM.SinceChkpt.K.Logged

(internal)

|Database.RM.SinceChkpt.Trans|(internal)

Database.RM.SinceStartup.Aborts

Failed transactions (usually caused by some corrupt database or Notes in DB. Look at log.nsf Misc Events if this is a large value)

|Database.RM.SinceStartup.Critical.Log.Times|Shows how many times your system ran critically log full. If non-zero, consider increasing log size.

Database.RM.SinceStartup.Log.Recs.Analyzed

(internal)

|Database.RM.SinceStartup.Log.Recs.Applied|(internal)

Database.RM.SinceStartup.Log.Recs.Read

(internal)

|Database.RM.SinceStartup.Log.Recs.Written|(internal)

Database.RM.SinceStartup.M.Logged

How much log has been written in MB

|Database.RM.SinceStartup.Trans|Actual Transactional Logging type transactions (API calls that did database updates)

Database.RM.Sys.Logged

Enabled If Disabled, no other Database.RM stats are shown.

|Database.RM.Sys.Log.Type|Circular Logging style (Circular or Archive)

Database.RM.Sys.M.Chkpt.Interval

Checkpoint interval

|Database.RM.Sys.M.Log.Size|Max Log size defined

Database.RM.Sys.M.Redo.Limit

Recommended max Redo.Hold span before aggressive flushing occurs.

|Database.RM.Sys.Phase|Normal Would show if Media Recover was under way 

Database.RM.Sys.Logged

Text

Indication of Transaction logging (""Enabled"" or ""Disabled"")

|Database.RM.Sys.M.Log.Size|Number|Size of Transaction Log (in Megabytes)

Disk.C.Free

Number

Free space on drive C:

|Disk.C.Size|Number|Size of disk C.

Disk.D.Free

Number

Free space on drive D:

|Disk.D.Size|Number|Size of disk D.

Disk.E.Free

Number

Free space on drive E:

|Disk.E.Size|Number|Size of disk E.

Disk.Fixed

Number

Number of fixed disks attached to this server.

|Disk.F.Free|Number|Free space on drive F:

Disk.F.Size

Number

Size of disk F.

|Disk.G.Free|Number|Free space on drive G:

Disk.G.Size

Number

Size of disk G.

|Disk.H.Free|Number|Free space on drive H:

Disk.H.Size

Number

Size of disk H.

|Disk.I.Free|Number|Free space on drive I:

Disk.I.Size

Number

Size of disk I.

|Disk.J.Free|Number|Free space on drive J:

Disk.J.Size

Number

Size of disk J.

|Disk.K.Free|Number|Free space on drive K:

Disk.K.Size

Number

Size of disk K.

|Disk.L.Free|Number|Free space on drive L:

Disk.L.Size

Number

Size of disk L.

|Disk.M.Free|Number|Free space on drive M:

Disk.M.Size

Number

Size of disk M.

|Disk.Swapdisk.Free|Number|Number of free bytes on the disk that contains the server's swap file.

Disk.SYS.AvailableBlocks

Number

Available disk blocks on NetWare SYS volume.

|Disk.SYS.AvailableDirectorySlots|Number|Available directory slots on NetWare SYS volume.

Disk.SYS.DriveNumber

Number

Physical drive number of NetWare SYS Volume.

|Disk.SYS.Free|Number|Free space on NetWare SYS Volume.'SYS'.

Disk.SYS.Name

Text

NetWare system volume name,

Disk.SYS.NotYetPurgableBlocks

Number

Blocks that ar not purgable on NetWare SYS Volume.

|Disk.SYS.Number|Number|Volume number of NetWare SYS Volume.

Disk.SYS.PurgableBlocks

Number

Number of purgable blocks on NetWare SYS Volume.

|Disk.SYS.Size|Number|Size of NetWare SYS Volume.

Disk.SYS.StartingBlock

Number

Physical block number where NetWare SYS Volume starts.

|Disk.SYS.TotalBlocks|Number|Physical blocks NetWare SYS Volume spans.

Disk.SYS.TotalDirectorySlots

Number

Number of directory slots NetWare SYS Volume spans.

|Disk.Vol0.Free|Number|Free space on NetWare Volume 0.

Disk.Vol0.Name

Text

Name of NetWare Volume 0.

|Disk.Vol0.Size|Number|Size of NetWare Volume 0.

Disk.Vol1.Free

Number

Free space on NetWare Volume 1.

|Disk.Vol1.Name|Text|Name of NetWare Volume 1.

Disk.Vol1.Size

Number

Size of NetWare Volume 1.

|Disk.Vol2.Free|Number|Free space on NetWare Volume 2.

Disk.Vol2.Name

Text

Name of NetWare Volume 2.

|Disk.Vol2.Size|Number|Size of NetWare Volume 2.

Disk.Vol3.Free

Number

Free space on NetWare Volume 3.

|Disk.Vol3.Name|Text|Name of NetWare Volume 3.

Disk.Vol3.Size

Number

Size of NetWare Volume 3.

|Disk.Volumes|Number|Total number of volumes on NetWare Server

Domino.BuildName

Text

Build name for this Domino Server

|Domino.BuildNumber|Number|Build number for this Domino Server

Domino.BuildPlatform

Text

OS platform for this Domino Server.

|Domino.BuildVersion|Text|Build version for this Domino Server

Domino.Command.CreateDocument

Number

Count of

'OpenDocument' URLs that have come into the server since server was last started.

Domino.Command.DeleteDocument

Number

Count of

'DeleteDocument' URLs that  have come into the server since server was last started.

Domino.Command.EditDocument

Number

Count of

'EditDocument' URLs that have come into the server since server was last started.

Domino.Command.Login

Number

Count of

'Login' URLs that have come into the server since server was last started.

Domino.Command.Navigate

Number

Count of

'Navigate' URLs that have come into the server since server was last started.

Domino.Command.OpenAbout

Number

Count of

'OpenAbout' URLs that have come into the server since server was last started.

Domino.Command.OpenAgent

Number

Count of

'OpenAgent' URLs that have come into the server since server was last started.

Domino.Command.OpenDatabase

Number

Count of

'OpenDatabase' URLs that have come into the server since server was last started.

Domino.Command.OpenDocument

Number

Count of

'OpenDocument' URLs that have come into the server since server was last started.

Domino.Command.OpenElement

Number

Count of

'OpenElement' URLs that have come into the server since server was last started.

Domino.Command.OpenForm

Number

Count of

'OpenForm' URLs that have come into the server since server was last started.

Domino.Command.OpenHelp

Number

Count of

'OpenHelp' URLs that have come into the server since server was last started.

Domino.Command.OpenIcon

Number

Count of

'OpenIcon' URLs that have come into the server since server was last started.

Domino.Command.OpenNavigator

Number

Count of

'OpenNavigator' URLs that have come into the server since server was last started.

Domino.Command.OpenServer

Number

Count of

'OpenServer' URLs that have come into the server since server was last started.

Domino.Command.OpenView

Number

Count of

'OpenView' URLs that have come into the server since server was last started.

Domino.Command.ReadForm

Number

Count of

'ReadForm' URLs that have come into the server since server was last started.

Domino.Command.SearchSite

Number

Count of

'SearchSite' URLs that have come into the server since server was last started.

Domino.Command.SearchView

Number

Count of

'SearchView' URLs that have come into the server since server was last started.

Domino.Command.Total

Number

Count of all URLs that have come into the server since server was last started.

|Domino.Command.Unknown|Number|Count of Unknown URLs that have come into the server since server was last started.

Domino.Config.ActiveThreads.Max

Number

Maximum Number of HTTP Threads

|Domino.Requests.Per1Day.Peak|Number|Peak requests over the past day.

Domino.Requests.Per1Day.PeakTime

Time

Time of peak requests over the past day.

|Domino.Requests.Per1Day.Total|Number|Total requests over the past day.

Domino.Requests.Per1Hour

Number

Total requests over the past hour.

|Domino.Requests.Per1Hour.Peak|Number|Peak requests over the past hour.

Domino.Requests.Per1Hour.PeakTime

Time

Time of peak requests over the past hour.

|Domino.Requests.Per1Hour.Total|Number|Total requests over the past hour.

Domino.Requests.Per1Minute

Number

Total requests over the past minute.

|Domino.Requests.Per1Minute.Peak|Number|Peak requests over the past minute.

Domino.Requests.Per1Minute.PeakTime

Time

Time of peak requests over the past Minute.

|Domino.Requests.Per1Minute.Total|Number|Total requests over the past minute.

Domino.Requests.Per5Minute

Number

Total requests over the past 5 minutes.

|Domino.Requests.Per5Minute.Peak|Number|Peak requests over the past 5 minutes.

Domino.Requests.Per5Minute.PeakTime

Time

Time of peak requests over the past 5 minutes.

|Domino.Requests.Per5Minute.Total|Number|Total requests over the past 5 minutes.

Domino.Requests.Total

Number

Total requests.

|Domino.Threads.Active.Peak|Number|Peak number of active HTTP Threads

EVENT.EventDispatcher.Queue.Entries

Number

Current number of items queued up in the main Event queue

|EVENT.EventDispatcher.Queue.MaxEntries|Number|Maximum number of items queued up in the main Event queue

EVENT.EVENTLOG.Queue.Entries

Number

Current number of items queued up in Event to be logged

|EVENT.EVENTLOG.Queue.MaxEntries|Number|Maximum number of items queued up in Event to be logged

EVENT.LOG.Queue.Entries

Number

Current number of items queued up in Event to be logged to statrep

|EVENT.LOG.Queue.MaxEntries|Number|Maximum number of items queued up in Event to be logged to statrep

EVENT.PROBEMGR.Queue.Entries

Number

Current number of items queued up in Event for DDM

|EVENT.PROBEMGR.Queue.MaxEntries|Number|Maximum number of items queued up in Event for DDM

FT.Domain.Index.Bytes.PerHour

Number

Domain full text indexing rate per hour of execution

|FT.Domain.Index.Count|Number|Total domain full text indexing operations (1 per database or file system)

FT.Domain.Index.Documents.Added

Number

Total number of documents added to all domain full text indexes

|FT.Domain.Index.Documents.Deleted|Number|Total documents deleted from all domain full text indexes

FT.Domain.Index.Total.Bytes

Number

Total bytes added to all domain full text indexes

|FT.Domain.Index.Total.TimeMS|Number|Total time performing all domain full text indexing operations in milliseconds

FT.Domain.Search.Average.TimeMS

Number

Average domain full text search time in milliseconds

|FT.Domain.Search.Count|Number|Count of all domain full text search operations

FT.Domain.Search.Max.ActualHits

Number

Maximum documents found in a domain full text search

|FT.Domain.Search.Total.ActualHits|Number|Total documents found in all domain full text searches

FT.Domain.Search.Total.Results

Number

Total documents returned in all domain full text searches

|FT.Domain.Search.Total.TimeMS|Number|Total time spent performing all domain full text searches in milliseconds

FT.Index.Bytes.PerHour

Number

Full text indexing rate per hour of execution

|FT.Index.Count|Number|Total full text indexing operations

FT.Index.Documents.Added

Number

Total number of documents added to all full text indexes

|FT.Index.Documents.Updated|Number|Total documents updated in all full text indexes

FT.Index.Total.Bytes

Number

Total bytes added to all full text indexes

|FT.Index.Total.TimeMS|Number|Total time performing all full text indexing operations in milliseconds

FT.Search.Average.TimeMS

Number

Average full text search time in milliseconds

|FT.Search.Count|Number|Count of all full text search operations

FT.Search.Max.ActualHits

Number

Maximum documents found in a full text search

|FT.Search.Max.Results|Number|Maximum documents returned in a full text search

FT.Search.Total.ActualHits

Number

Total documents found in all full text searches

|FT.Search.Total.Results|Number|Total documents returned in all full text searches

FT.Search.Total.TimeMS

Number

Total time spent performing all full text searches in milliseconds

|Health.CPUUtil.Threshold.Critical|Number|Server Health: CPU Utilization Critical Threshold

Health.CPUUtil.Threshold.Warning

Number

Server Health: CPU Utilization Warning Threshold

|Health.CPUUtil.Value|Number|Server Health: CPU Utilization Index Value

Health.DiskUtil.Threshold.Critical

Number

Server Health: Disk Utilization Critical Threshold

|Health.DiskUtil.Threshold.Warning|Number|Server Health: Disk Utilization Warning Threshold

Health.DiskUtil.Value

Number

Server Health: Disk Utilization Index Value

|Health.HTTPResponse.Threshold.Critical|Number|Server Health: HTTP Response Critical Threshold

Health.HTTPResponse.Threshold.Warning

Number

Server Health: HTTP Response Warning Threshold

|Health.HTTPResponse.Value|Number|Server Health: HTTP Response Index Value

Health.IMAPResponse.Threshold.Critical

Number

Server Health: IMAP Response Critical Threshold

|Health.IMAPResponse.Threshold.Warning|Number|Server Health: IMAP Response Warning Threshold

Health.IMAPResponse.Value

Number

Server Health: IMAP Response Index Value

|Health.LDAPResponse.Threshold.Critical|Number|Server Health: LDAP Response Critical Threshold

Health.LDAPResponse.Threshold.Warning

Number

Server Health: LDAP Response Warning Threshold

|Health.LDAPResponse.Value|Number|Server Health: LDAP Response Index Value

Health.MailLatency.Threshold.Critical

Number

Server Health: Mail Delivery Latency Critical Threshold

|Health.MailLatency.Threshold.Warning|Number|Server Health: Mail Delivery Latency Warning Threshold

Health.MailLatency.Value

Number

Server Health: Mail Delivery Latency Index Value

|Health.MemoryUtil.Threshold.Critical|Number|Server Health: Memory Utilization Critical Threshold

Health.MemoryUtil.Threshold.Warning

Number

Server Health: Memory Utilization Warning Threshold

|Health.MemoryUtil.Value|Number|Server Health: Memory Utilization Index Value

Health.NetworkUtil.Threshold.Critical

Number

Server Health: Network Utilization Critical Threshold

|Health.NetworkUtil.Threshold.Warning|Number|Server Health: Network Utilization Warning Threshold

Health.NetworkUtil.Value

Number

Server Health: Network Utilization Index Value

|Health.NRPCNameLookup.Threshold.Critical|Number|Server Health: NRPC Addressee Lookup Critical Threshold

Health.NRPCNameLookup.Threshold.Warning

Number

Server Health: NRPC Addressee Lookup Warning Threshold

|Health.NRPCNameLookup.Value|Number|Server Health: NRPC Addressee Lookup Index Value

Health.Overall.Threshold.Critical

Number

Server Health: Overall Server Health Critical Threshold

|Health.Overall.Threshold.Warning|Number|Server Health: Overall Server Health Warning Threshold

Health.Overall.Value

Number

Server Health: Overall Server Health Index Value

|Health.ServerResponse.Threshold.Critical|Number|Server Health: Server Response Time Critical Threshold|;|;|;

Health.ServerResponse.Threshold.Warning

Number

Server Health: Server Response Time Warning Threshold

Health.ServerResponse.Value

Number

Server Health: Server Response Time Index Value

|HTTP.Worker.Total.RequestsProcessed|Number|Total Number of HTTP Requests Processed

HTTP.Worker.Total.TotalRequestTime

Number

Aggregate time (in milliseconds) taken to process the HTTP requests

|ICM.Command.Redirects.ClusterBusy|Number|Number of commands received when all servers are busy

ICM.Command.Redirects.Successful

Number

Number of successful redirects

|ICM.Command.Redirects.Unsuccessful|Number|Number of unsuccessful redirects

ICM.Command.Total

Number

Total number of commands received

|ICM.Command.Unknown|Number|Total number of unknown commands received

ICM.Receive.Error

Number

Total number of commands not received due to error

|ICM.Requests.Per1Hour.Total|Number|Number of requests received in the last hour

ICM.Requests.Per1Minute.Total

Number

Number of requests in the last one minute

|ICM.Requests.Per5Minutes.Total|Number|Number of requests in the last 5 minutes

ICM.Sessions.Threads.Busy

Number

Number of ICM server tasks currently running

|ICM.Sessions.Total|Number|Total number ICM server tasks since server startup

IMAP.Sessions.Accept.Queue

Number

IMAP listener work queue of incoming sessions to be processed

|IMAP.Sessions.Active|Number|Current number IMAP server tasks

IMAP.Sessions.Inbound.BytesReceived

Number

Total Number of BytesReceived by this IMAP server

|IMAP.Sessions.Inbound.BytesSent|Number|Total Number of BytesSent by this IMAP server

IMAP.Sessions.Inbound.Non-SSL

Number

Number of IMAP server inbound TCP connections (non SSL)

|IMAP.Sessions.Inbound.SSL|Number|Number of IMAP Server inbound SSL connections

IMAP.Sessions.Inbound.SSL.Bad_Handshake

Number

Number of IMAP server

 SSL Handshake Failures

IMAP.Sessions.Inbound.Total

Number

Total Number of IMAP server inbound connections (SSL & non SSL)

|IMAP.Sessions.Peak|Number|Peak number IMAP server tasks since server startup

IMAP.Sessions.Threads.Busy

Number

Number of IMAP server tasks currently running

|IMAP.Sessions.Threads.Idle|Number|Number of IMAP server tasks currently idle

IMAP.Sessions.Total

Number

Total number IMAP server tasks since server startup

|LDAP.Anonymous LDAP Connections|Number|Anonymous connection count

LDAP.Average LDAP Search time

Number

Average of all successful search times

|LDAP.Failed LDAP Connections|Number|Failed connections count

LDAP.Longest LDAP Search request

Number

Search value for longest search

|LDAP.Longest LDAP Search time|Number|Longest individual search time

LDAP.Sessions.Accept.Queue

Number

LDAP Listener work queue of incoming sessions to be processed

|LDAP.Sessions.Active|Number|Current number LDAP server tasks

LDAP.Sessions.Inbound.BytesReceived

Number

Total Number of BytesReceived by this LDAP server

|LDAP.Sessions.Inbound.BytesSent|Number|Total Number of BytesSent by this LDAP server

LDAP.Sessions.Inbound.Non-SSL

Number

Number of LDAP server inbound TCP connections (non SSL)

|LDAP.Sessions.Inbound.SSL|Number|Number of LDAP server inbound SSL connections

LDAP.Sessions.Inbound.SSL.Bad_Handshake

Number

Number ofLDAP server

 SSL Handshake Failures

LDAP.Sessions.Inbound.Total

Number

Total Number ofLDAP server inbound connections (SSL & non SSL)

|LDAP.Sessions.Peak|Number|Peak number LDAP server tasks since server startup

LDAP.Sessions.Threads.Busy

Number

Number of LDAP server tasks currently running

|LDAP.Sessions.Threads.Idle|Number|Number ofLDAP server tasks currently idle

LDAP.Sessions.Total

Number

Total number LDAP server tasks since server startup

|LDAP.Simple LDAP Connections|Number|Simple connection counter

LDAP.Strong Authentication Connections

Number

Strong authentication connection count

|LDAP.Total LDAP Abandons|Number|Count of abandoned operations

LDAP.Total LDAP Adds

Number

Count of attempted add operations

|LDAP.Total LDAP Compares|Number|Count of attempted compare operations

LDAP.Total LDAP Connections

Number

total of all connections

|LDAP.Total LDAP Deletes|Number|Count of attempted delete operations

LDAP.Total LDAP Extended Operations

Number

Count of attempted extended operations

|LDAP.Total LDAP Modifies|Number|Count of attempted modify operations

LDAP.Total LDAP ModifyDNs

Number

Count of attempted modfydn operations

|LDAP.Total LDAP Search Time|Number|Total aggregate time for all LDAP searches (in seconds)

LDAP.Total LDAP Searches

Number

Count of attempted searched performed

|LDAP.Total LDAP Searches for Root DSE|Number|Count of search requests for root DSE

LDAP.Total LDAP Searches for Subschema

Number

Count of search requests for subschema entry

|MailByDest..Delivered|Number|Total number of delivered messages

MailByDest..TotalFailures

Number

Total number of mail failures

|MailByDest..TotalRouted|Number|Total number of mail failures 

Mail.AverageDeliverTime

Time

Average time for mail delivery.

|Mail.AverageServerHops|Number|Average number of server hops for mail delivery.

Mail.AverageSizeDelivered

Number

Average size of mail delivered.

|Mail.Dead|Number|Number of dead (undeliverable) messages in MAIL.BOX

Mail.Delivered

Number

Number of mail messages moved into MAIL.BOX by router.

|Mail.Deliveries|Number|Count of actual mail items delivered (may be different from delivered which counts individual messages)

Mail.DeliveryThreads.Active

Number

Current Number of Active Delivery Threads

|Mail.DeliveryThreads.Max|Number|Maximum Number of Delivery Threads

Mail.DeliveryThreads.Total

Number

Current Number of Delivery Threads (Active and Inactive)

|Mail.Domain|Text|Mail domain name.

Mail.Hold

Number

Number of mail messages in message queue on hold

|Mail.IMAP.Cache.MsgInsertAttempts|Number|Number of IMAP server attempts to insert message in cache

Mail.IMAP.FindCacheAttempted

Number

Number of attempts by IMAP server

 to find message in cache

Mail.IMAP.NumCacheHits

Number

Number of messages IMAP server found in cache

|Mail.IMAP.NumMsgInsertedInCache|Number|Number of messages IMAP server inserted into Cache

Mail.Mailbox.AccessConflicts

Number

Number of times there has been contention over a mail.box file

|Mail.Mailbox.Accesses|Number|Total Number of accesses of a mail.box file.

Mail.Mailbox.CurrentAccesses

Number

Current number of processes/threads accessing the mail.box file(s)

|Mail.MaximumDeliverTime|Time|Maximum time for mail delivery.

Mail.MaximumServerHops

Number

Maximum number of server hops for mail delivery.

|Mail.MaximumSizeDelivered|Number|Maximum size of mail delivered.

Mail.MessagesReenumerated

Number

Number of messages reenumerated since router startup.

|Mail.MinimumDeliverTime|Time|Minimum time for mail delivery.

Mail.MinimumServerHops

Number

Minimum number of server hops for mail delivery.

|Mail.MinimumSizeDelivered|Number|Minimum size of mail delivered.

Mail.PeakByteTransferRate

Number

Peak transfer rate

|Mail.PeakMessagesTransferred|Number|Peak number of messages transfered

Mail.PeakMessageTransferRate

Number

Peak message transfer rate

|Mail.PeakMessageTransferTime|Time|Time of peak message transfer rate

Mail.PeakTotalBytesTransfered

Number

Highest number of bytes transfered.

|Mail.Queue.Dispatch.Processed|Number|Number of dispatch requests processed by the router.

Mail.Queue.Dispatch.ProcessTime.Average

Number

Since router start, average time to process a dispatch request once removed from the queue

|Mail.Queue.Dispatch.ProcessTime.Current|Number|Time to process the most recent dispatch request after removal from queue

Mail.Queue.Dispatch.ProcessTime.Peak

Number

Largest amount of time to process a dispatch request after removal from queue

|Mail.Queue.Dispatch.ProcessTime.Peak.Time|Time|Time when dispatch request processing time was at its peak

Mail.Queue.Dispatch.Total

Number

Number of dispatch requests created by the router since starting

|Mail.Queue.Dispatch.Waiting|Number|Number of dispatch requests currently in queue to be processed

Mail.Queue.Dispatch.Waiting.Peak

Number

Maximum number of dispatch requests waiting in queue to be processed since router was started

|Mail.Queue.Dispatch.WaitTime.Average|Number|Since router start, average time dispatch requests have waited in queue

Mail.Queue.Dispatch.WaitTime.Current

Number

Time spent on queue by the most recently removed dispatch request

|Mail.Queue.Dispatch.WaitTime.Peak|Number|Largest amount of time a dispatch request has waited in queue

Mail.Queue.Dispatch.WaitTime.Peak.Time

Time

Time when request queue wait time was at its peak

|MAIL.TotalFailures|Number|Total number of mail failures.

Mail.TotalKBDelivered

Number

The total size of all mail messages delivered.

|Mail.TotalKBTransferred|Number|Total mail transfered in KBytes.

Mail.TotalPending

Number

Number of mail messages pending.

|Mail.TotalRouted|Number|Number of mail messages moved from MAIL.BOX to other servers for delivery. 

Mail.TotalRouted.NRPC	Number	Number of mail messages moved from MAIL.BOX via NRPC
Mail.TotalRouted.SMTP	Number	Number of mail messages moved from MAIL.BOX via SMTP

|Mail.TransferFailures|Number|Number of mail messages router was unable to transfer.

Mail.Transferred

Number

Number of mail messages router attempted to transfer.

|Mail.TransferThreads.Active|Number|Current Number of Active Transfer Threads

Mail.TransferThreads.Max

Number

Maximum Number of Transfer Threads.

|Mail.TransferThreads.Total|Number|Current Number of Transfer Threads (Active and Inactive)

Mail.Waiting

Number

Number of outgoing mail messages currently in MAIL.BOX waiting for transfer

|Mail.WaitingforDNS|Number|Number of mail messages in MAIL.BOX waiting for DNS

Mail.WaitingRecipients

Number

Number of pending mail messages in MAIL.BOX awaiting delivery into user

's mail files.

Mem.Allocated

Number

Total amount of memory allocated by the server

|Mem.Allocated.Process|Number|Total amount of non-shared memory allocated by individual processes.

Mem.Allocated.Shared

Number

Total amount of server memory allocated as shared memory.

|Mem.Availability|Text|Availability of server memory.

Mem.Free

Number

Amount of free memory available to the server

|Mem.FTVDKMaxBufferSizeUsed|Number|FTVDK Max buffer size used

Mem.PhysicalRam

Number

Total amount of physical memory on the server

|Mem.Quota|Number|Maximum memory that can be allocated by the server

Mem.SwapFile.Size

Number

Size (in bytes) of system swap file

|Mem.Timeouts|Text|Memory timeouts.

Monitor..Failure

Text

Event queue failure

|Monitor..Fatal|Text|Event queue fatal error

Monitor..Warning(High)

Text

Event queue failure warning

|Monitor..Heartbeat|Number|Event heartbeat count

MTA.ccMail.Dead

Number

Dead messages in ccMail MTA Inbound and Outbound work queues.

|MTA.ccMail.TotalKBTransferred|Number|Total number of Kilobytes (Inbound and Outbound).

MTA.ccMail.TotalRouted

Number

Total recipients in ccMail MTA messages routed (Inbound and Outbound).

|MTA.ccMail.TransferFailures|Number|Total ccMail MTA transmission failures resulting in an NDR or UMN.

MTA.ccMail.Transferred

Number

Total ccMail MTA messages transferred (Inbound and Outbound).

|MTA.ccMail.Waiting|Number|Total messages waiting in ccMail MTA work queues .

MTA.ccMail.WaitingRecipients

Number

Number of Responsible Recipients in waiting mail held in Inbound and Outbound work queues.

|MTA.Smtp.Dead|Number|Dead messages in SMTP/MIME MTA Inbound and Outbound work queues.

MTA.Smtp.TotalKBTransferred

Number

Total number of Kilobytes (Inbound and Outbound).

|MTA.Smtp.TotalRouted|Number|Total recipients in SMTP/MIME MTA messages routed (Inbound and Outbound).

MTA.Smtp.TransferFailures

Number

Total SMTP/MIME MTA transmission failures resulting in an NDR or UMN.

|MTA.Smtp.Transferred|Number|Total SMTP/MIME MTA messages transferred (Inbound and Outbound).

MTA.Smtp.Waiting

Number

Total messages waiting in SMTP/MIME MTA work queues .

|MTA.Smtp.WaitingRecipients|Number|Number of Responsible Recipients in waiting mail held in Inbound and Outbound work queues.

MTA.X400.Dead

Number

Dead messages in X400 MTA Inbound and Outbound work queues.

|MTA.X400.TotalKBTransferred|Number|Total number of Kilobytes (Inbound and Outbound).

MTA.X400.TotalRouted

Number

Total recipients in X400 MTA messages routed (Inbound and Outbound).

|MTA.X400.TransferFailures|Number|Total X400 MTA transmission failures resulting in an NDR or UMN.

MTA.X400.Transferred

Number

Total X400 MTA messages transferred (Inbound and Outbound).

|MTA.X400.Waiting|Number|Total messages waiting in X400 MTA work queues .

MTA.X400.WaitingRecipients

Number

Number of Responsible Recipients in waiting mail held in Inbound and Outbound work queues.

|NETBIOS.LAN0.CommandBlocks.Available|Number|NetBios command block available.

NETBIOS.LAN0.CommandBlocks.Total

Number

Total number of NetBios command blocks.

|NETBIOS.LAN0.Errors.Alignment|Number|Number of NetBios alignment errors.

NETBIOS.LAN0.Errors.Collisions

Number

Number of NetBios collisions.

|NETBIOS.LAN0.Errors.CRC|Number|Number of NetBios CRC errors.

NETBIOS.LAN0.Packets.Received

Number

Number of NetBios packets received.

|NETBIOS.LAN0.Packets.Transmitted|Number|Number of NetBios packets transmitted.

NETBIOS.LAN0.Receiver.Resources.Exhausted

Number

Number of exhausted NetBios resources.

|NETBIOS.LAN0.ReportPeriodMinutes|Number|Minutes since last update

NETBIOS.LAN0.Sessions.InUse

Number

Number of NetBios sessions in use.

|NETBIOS.LAN0.Sessions.Maximum|Number|Maximum number of NetBios sessions.

NETBIOS.LAN0.Session.DataPacketSize

Number

Size of NetBios data packets.

|NETBIOS.LAN0.Transmissions.Aborted|Number|Number of NetBios transmissions aborted.

NETBIOS.LAN0.Transmissions.Retried

Number

Number of NetBios transmissions retried.

|NETBIOS.LAN0.Unit.Num|Number|Unit number for Netbios Port

NETBIOS.LAN0.Version.Major

Number

Major Version Number for NetBios

|NETBIOS.LAN0.Version.Minor|Number|Minor version number for NetBios

NETBIOS.LAN1.CommandBlocks.Available

Number

NetBios command block available.

|NETBIOS.LAN1.CommandBlocks.Total|Number|Total number of NetBios command blocks.

NETBIOS.LAN1.Errors.Alignment

Number

Number of NetBios alignment errors.

|NETBIOS.LAN1.Errors.Collisions|Number|Number of NetBios collisions.

NETBIOS.LAN1.Errors.CRC

Number

Number of NetBios CRC errors.

|NETBIOS.LAN1.Packets.Received|Number|Number of NetBios packets received.

NETBIOS.LAN1.Packets.Transmitted

Number

Number of NetBios packets transmitted.

|NETBIOS.LAN1.Receiver.Resources.Exhausted|Number|Number of exhausted NetBios resources.

NETBIOS.LAN1.ReportPeriodMinutes

Number

Minutes since last update

|NETBIOS.LAN1.Sessions.InUse|Number|Number of NetBios sessions in use.

NETBIOS.LAN1.Sessions.Maximum

Number

Maximum number of NetBios sessions.

|NETBIOS.LAN1.Session.DataPacketSize|Number|Size of NetBios data packets.

NETBIOS.LAN1.Transmissions.Aborted

Number

Number of NetBios transmissions aborted.

|NETBIOS.LAN1.Transmissions.Retried|Number|Number of NetBios transmissions retried.

NETBIOS.LAN1.Unit.Num

Number

Unit number for Netbios Port

|NETBIOS.LAN1.Version.Major|Number|Major Version Number for NetBios

NETBIOS.LAN1.Version.Minor

Number

Minor version number for NetBios

|NETBIOS.LAN2.CommandBlocks.Available|Number|NetBios command block available.

NETBIOS.LAN2.CommandBlocks.Total

Number

Total number of NetBios command blocks.

|NETBIOS.LAN2.Errors.Alignment|Number|Number of NetBios alignment errors.

NETBIOS.LAN2.Errors.Collisions

Number

Number of NetBios collisions.

|NETBIOS.LAN2.Errors.CRC|Number|Number of NetBios CRC errors.

NETBIOS.LAN2.Packets.Received

Number

Number of NetBios packets received.

|NETBIOS.LAN2.Packets.Transmitted|Number|Number of NetBios packets transmitted.

NETBIOS.LAN2.Receiver.Resources.Exhausted

Number

Number of exhausted NetBios resources.

|NETBIOS.LAN2.ReportPeriodMinutes|Number|Minutes since last update

NETBIOS.LAN2.Sessions.InUse

Number

Number of NetBios sessions in use.

|NETBIOS.LAN2.Sessions.Maximum|Number|Maximum number of NetBios sessions.

NETBIOS.LAN2.Session.DataPacketSize

Number

Size of NetBios data packets.

|NETBIOS.LAN2.Transmissions.Aborted|Number|Number of NetBios transmissions aborted.

NETBIOS.LAN2.Transmissions.Retried

Number

Number of NetBios transmissions retried.

|NETBIOS.LAN2.Unit.Num|Number|Unit number for Netbios Port

NETBIOS.LAN2.Version.Major

Number

Major Version Number for NetBios

|NETBIOS.LAN2.Version.Minor|Number|Minor version number for NetBios

NETBIOS..CommandBlocks.Available

Number

NetBios command block available.

|NETBIOS..CommandBlocks.Total|Number|Total number of NetBios command blocks.

NETBIOS..Errors.Alignment

Number

Number of NetBios alignment errors.

|NETBIOS..Errors.Collisions|Number|Number of NetBios collisions.

NETBIOS..Errors.CRC

Number

Number of NetBios CRC errors.

|NETBIOS..Packets.Received|Number|Number of NetBios packets received.

NETBIOS..Packets.Transmitted

Number

Number of NetBios packets transmitted.

|NETBIOS..Receiver.Resources.Exhausted|Number|Number of exhausted NetBios resources.

NETBIOS..ReportPeriodMinutes

Number

Minutes since last update

|NETBIOS..Sessions.InUse|Number|Number of NetBios sessions in use.

NETBIOS..Sessions.Maximum

Number

Maximum number of NetBios sessions.

|NETBIOS..Session.DataPacketSize|Number|Size of NetBios data packets.

NETBIOS..Transmissions.Aborted

Number

Number of NetBios transmissions aborted.

|NETBIOS..Transmissions.Retried|Number|Number of NetBios transmissions retried.

NETBIOS..Unit.Num

Number

Unit number for Netbios Port

|NETBIOS..Version.Major|Number|Major Version Number for NetBios

NETBIOS..Version.Minor

Number

Minor version number for NetBios

|NET.COM1.BytesReceived|Number|Number of network bytes received.

NET.COM1.BytesSent

Number

Number of network bytes sent.

|NET.COM1.Sessions.Established.Incoming|Number|Number of Incoming sessions established.

NET.COM1.Sessions.Established.Outgoing

Number

Number of Outgoing sessions established.

|NET.COM1.Sessions.Limit|Number|Number of sessions at limit.

NET.COM1.Sessions.LimitMax

Number

Number of sessions at maximum limit.

|NET.COM1.Sessions.LimitMin|Number|Number of sessions at minimum limit.

NET.COM1.Sessions.Peak

Number

Peak number of sessions.

|NET.COM1.Sessions.Recycled|Number|Number of sessions that have been recycled.

NET.COM1.Sessions.Recycling

Number

Number of sessions recycling.

|NET.COM2.BytesReceived|Number|Number of network bytes received.

NET.COM2.BytesSent

Number

Number of network bytes sent.

|NET.COM2.Sessions.Established.Incoming|Number|Number of Incoming sessions established.

NET.COM2.Sessions.Established.Outgoing

Number

Number of Outgoing sessions established.

|NET.COM2.Sessions.Limit|Number|Number of sessions at limit.

NET.COM2.Sessions.LimitMax

Number

Number of sessions at maximum limit.

|NET.COM2.Sessions.LimitMin|Number|Number of sessions at minimum limit.

NET.COM2.Sessions.Peak

Number

Peak number of sessions.

|NET.COM2.Sessions.Recycled|Number|Number of sessions that have been recycled.

NET.COM2.Sessions.Recycling

Number

Number of sessions recycling.

|NET.COM3.BytesReceived|Number|Number of network bytes received.

NET.COM3.BytesSent

Number

Number of network bytes sent.

|NET.COM3.Sessions.Established.Incoming|Number|Number of Incoming sessions established.

NET.COM3.Sessions.Established.Outgoing

Number

Number of Outgoing sessions established.

|NET.COM3.Sessions.Limit|Number|Number of sessions at limit.

NET.COM3.Sessions.LimitMax

Number

Number of sessions at maximum limit.

|NET.COM3.Sessions.LimitMin|Number|Number of sessions at minimum limit.

NET.COM3.Sessions.Peak

Number

Peak number of sessions.

|NET.COM3.Sessions.Recycled|Number|Number of sessions that have been recycled.

NET.COM3.Sessions.Recycling

Number

Number of sessions recycling.

|NET.COM4.BytesReceived|Number|Number of network bytes received.

NET.COM4.BytesSent

Number

Number of network bytes sent.

|NET.COM4.Sessions.Established.Incoming|Number|Number of Incoming sessions established.

NET.COM4.Sessions.Established.Outgoing

Number

Number of Outgoing sessions established.

|NET.COM4.Sessions.Limit|Number|Number of sessions at limit.

;

;

;

|NET.COM4.Sessions.LimitMax|Number|Number of sessions at maximum limit.

NET.COM4.Sessions.LimitMin

Number

Number of sessions at minimum limit.

|NET.COM4.Sessions.Peak|Number|Peak number of sessions.

NET.COM4.Sessions.Recycled

Number

Number of sessions that have been recycled.

|NET.COM4.Sessions.Recycling|Number|Number of sessions recycling.

NET.COM5.BytesReceived

Number

Number of network bytes received.

|NET.COM5.BytesSent|Number|Number of network bytes sent.

NET.COM5.Sessions.Established.Incoming

Number

Number of Incoming sessions established.

|NET.COM5.Sessions.Established.Outgoing|Number|Number of Outgoing sessions established.

NET.COM5.Sessions.Limit

Number

Number of sessions at limit.

|NET.COM5.Sessions.LimitMax|Number|Number of sessions at maximum limit.

NET.COM5.Sessions.LimitMin

Number

Number of sessions at minimum limit.

|NET.COM5.Sessions.Peak|Number|Peak number of sessions.

NET.COM5.Sessions.Recycled

Number

Number of sessions that have been recycled.

|NET.COM5.Sessions.Recycling|Number|Number of sessions recycling.

NET.LAN0.BytesReceived

Number

Number of network bytes received.

|NET.LAN0.BytesSent|Number|Number of network bytes sent.

NET.LAN0.Sessions.Established.Incoming

Number

Number of Incoming sessions established.

|NET.LAN0.Sessions.Established.Outgoing|Number|Number of Outgoing sessions established.

NET.LAN0.Sessions.Limit

Number

Number of sessions at limit.

|NET.LAN0.Sessions.LimitMax|Number|Number of sessions at maximum limit.

NET.LAN0.Sessions.LimitMin

Number

Number of sessions at minimum limit.

|NET.LAN0.Sessions.Peak|Number|Peak number of sessions.

NET.LAN0.Sessions.Recycled

Number

Number of sessions that have been recycled.

|NET.LAN0.Sessions.Recycling|Number|Number of sessions recycling.

NET.LAN1.BytesReceived

Number

Number of network bytes received.

|NET.LAN1.BytesSent|Number|Number of network bytes sent.

NET.LAN1.Sessions.Established.Incoming

Number

Number of Incoming sessions established.

|NET.LAN1.Sessions.Established.Outgoing|Number|Number of Outgoing sessions established.

NET.LAN1.Sessions.Limit

Number

Number of sessions at limit.

|NET.LAN1.Sessions.LimitMax|Number|Number of sessions at maximum limit.

NET.LAN1.Sessions.LimitMin

Number

Number of sessions at minimum limit.

|NET.LAN1.Sessions.Peak|Number|Peak number of sessions.

NET.LAN1.Sessions.Recycled

Number

Number of sessions that have been recycled.

|NET.LAN1.Sessions.Recycling|Number|Number of sessions recycling.

NET.LAN2.BytesReceived

Number

Number of network bytes received.

|NET.LAN2.BytesSent|Number|Number of network bytes sent.

NET.LAN2.Sessions.Established.Incoming

Number

Number of Incoming sessions established.

|NET.LAN2.Sessions.Established.Outgoing|Number|Number of Outgoing sessions established.

NET.LAN2.Sessions.Limit

Number

Number of sessions at limit.

|NET.LAN2.Sessions.LimitMax|Number|Number of sessions at maximum limit.

NET.LAN2.Sessions.LimitMin

Number

Number of sessions at minimum limit.

|NET.LAN2.Sessions.Peak|Number|Peak number of sessions.

NET.LAN2.Sessions.Recycled

Number

Number of sessions that have been recycled.

|NET.LAN2.Sessions.Recycling|Number|Number of sessions recycling.

NET.Log..UnwrittenEntries

Number

Number of unwritten log notes waiting to be written

|NET.SPX.BytesReceived|Number|Number of network bytes received.

NET.SPX.BytesSent

Number

Number of network bytes sent.

|NET.SPX.Sessions.Established.Incoming|Number|Number of Incoming sessions established.

NET.SPX.Sessions.Established.Outgoing

Number

Number of Outgoing sessions established.

|NET.SPX.Sessions.Limit|Number|Number of sessions at limit.

NET.SPX.Sessions.LimitMax

Number

Number of sessions at maximum limit.

|NET.SPX.Sessions.LimitMin|Number|Number of sessions at minimum limit.

NET.SPX.Sessions.Peak

Number

Peak number of sessions.

|NET.SPX.Sessions.Recycled|Number|Number of sessions that have been recycled.

NET.SPX.Sessions.Recycling

Number

Number of sessions recycling.

|NET.TCPIP.BytesReceived|Number|Number of network bytes received.

NET.TCPIP.BytesSent

Number

Number of network bytes sent.

|NET.TCPIP.Sessions.Established.Incoming|Number|Number of Incoming sessions established.

NET.TCPIP.Sessions.Established.Outgoing

Number

Number of Outgoing sessions established.

|NET.TCPIP.Sessions.Limit|Number|Number of sessions at limit.

NET.TCPIP.Sessions.LimitMax

Number

Number of sessions at maximum limit.

|NET.TCPIP.Sessions.LimitMin|Number|Number of sessions at minimum limit.

NET.TCPIP.Sessions.Peak

Number

Peak number of sessions.

|NET.TCPIP.Sessions.Recycled|Number|Number of sessions that have been recycled.

NET.TCPIP.Sessions.Recycling

Number

Number of sessions recycling.

|NET.TCP.BytesReceived|Number|Number of network bytes received.

NET.TCP.BytesSent

Number

Number of network bytes sent.

|NET.TCP.Sessions.Established.Incoming|Number|Number of Incoming sessions established.

NET.TCP.Sessions.Established.Outgoing

Number

Number of Outgoing sessions established.

|NET.TCP.Sessions.Limit|Number|Number of sessions at limit.

NET.TCP.Sessions.LimitMax

Number

Number of sessions at maximum limit.

|NET.TCP.Sessions.LimitMin|Number|Number of sessions at minimum limit.

NET.TCP.Sessions.Peak

Number

Peak number of sessions.

|NET.TCP.Sessions.Recycled|Number|Number of sessions that have been recycled.

NET.TCP.Sessions.Recycling

Number

Number of sessions recycling.

|NET.VINES.BytesReceived|Number|Number of network bytes received.

NET.VINES.BytesSent

Number

Number of network bytes sent.

|NET.VINES.Sessions.Established.Incoming|Number|Number of Incoming sessions established.

NET.VINES.Sessions.Established.Outgoing

Number

Number of Outgoing sessions established.

|NET.VINES.Sessions.Limit|Number|Number of sessions at limit.

NET.VINES.Sessions.LimitMax

Number

Number of sessions at maximum limit.

|NET.VINES.Sessions.LimitMin|Number|Number of sessions at minimum limit.

NET.VINES.Sessions.Peak

Number

Peak number of sessions.

|NET.VINES.Sessions.Recycled|Number|Number of sessions that have been recycled.

NET.VINES.Sessions.Recycling

Number

Number of sessions recycling.

|NET..BytesReceived|Number|Number of network bytes received.

NET..BytesSent

Number

Number of network bytes sent.

|NET..Sessions.Established.Incoming|Number|Number of Incoming sessions established.

NET..Sessions.Established.Outgoing

Number

Number of Outgoing sessions established.

|NET..Sessions.Limit|Number|Number of sessions at limit.

NET..Sessions.LimitMax

Number

Number of sessions at maximum limit.

|NET..Sessions.LimitMin|Number|Number of sessions at minimum limit.

NET..Sessions.Peak

Number

Peak number of sessions.

|NET..Sessions.Recycled|Number|Number of sessions that have been recycled.

NET..Sessions.Recycling

Number

Number of sessions recycling.

|NNTP.Articles.Posted|Number|Number of news articles posted to the NNTP server.

NNTP.Articles.Sent

Number

Number of news articles sent from the NNTP server.

|NNTP.Bytes.Received|Number|Number of bytes received by NNTP server.

NNTP.Bytes.Sent

Number

Number of bytes sent from NNTP server.

|NNTP.Pull.Articles.Failed|Number|Number of failed news article transfers received by the NNTP server during pull feeds.

NNTP.Pull.Articles.Offered

Number

Number of news articles offered by the NNTP server during pull feeds.

|NNTP.Pull.Articles.Requested|Number|Number of news articles requested from the NNTP server during pull feeds.

NNTP.Pull.Articles.Transfered

Number

Number of news articles transfered by the NNTP server during pull feeds.

|NNTP.Push.Articles.Failed|Number|Number of failed news article transfers by the NNTP server during push feeds.

NNTP.Push.Articles.Offered

Number

Number of news articles offered by the NNTP server during push feeds.

|NNTP.Push.Articles.Requested|Number|Number of news articles requested from the NNTP server during push feeds.

NNTP.Push.Articles.Transfered

Number

Number of news articles transfered by the NNTP server during push feeds.

|NNTP.Sessions.Accept.Queue|Number|NNTP listener work queue of incoming sessions to be processed

NNTP.Sessions.Active

Number

Current number NNTP server tasks

|NNTP.Sessions.Inbound.BytesReceived|Number|Total Number of BytesReceived by this NNTP server

NNTP.Sessions.Inbound.BytesSent

Number

Total Number of BytesSent by this NNTP server

|NNTP.Sessions.Inbound.Non-SSL|Number|Number of NNTP server inbound TCP connections (non SSL)

NNTP.Sessions.Inbound.SSL

Number

Number of NNTP server inbound SSL connections

|NNTP.Sessions.Inbound.SSL.Bad_Handshake|Number|Number of NNTP server  SSL Handshake Failures

NNTP.Sessions.Inbound.Total

Number

Total Number of NNTP server inbound connections (SSL & non SSL)

|NNTP.Sessions.Outgoing.non-SSL|Number|Total Outgoing non-SSL TCP Connections 

NNTP.Sessions.Outgoing.SSL	Number	Total Outgoing SSL TCP Connections
NNTP.Sessions.Peak	Number	Peak number NNTP server tasks since server startup

|NNTP.Sessions.Threads.Busy|Number|Number of NNTP server tasks currently running

NNTP.Sessions.Threads.Idle

Number

Number of NNTP server tasks currently idle

|NNTP.Sessions.Total|Number|Total number NNTP server tasks since server startup

NNTP..Articles.Posted

Number

Number of news articles posted by the server ""RemoteServerName"" to the NNTP server.

|NNTP..Articles.Sent|Number|Number of news articles sent to the server ""RemoteServerName"" from the NNTP server.

NNTP..Bytes.Received

Number

Number of bytes received from the server ""RemoteServerName"" by the NNTP server.

|NNTP..Bytes.Sent|Number|Number of bytes sent to the server ""RemoteServerName"" by the NNTP server.

NNTP..Pull.Articles.Failed

Number

Number of failed news article transfers from the server ""RemoteServerName"" to the NNTP server during pull feeds.

|NNTP..Pull.Articles.Offered|Number|Number of news articles offered by the server ""RemoteServerName"" to the NNTP server during pull feeds.

NNTP..Pull.Articles.Requested

Number

Number of news articles requested from server ""RemoteServerName"" by the NNTP server during pull feeds.

|NNTP..Pull.Articles.Transfered|Number|Number of news articles transfered from ""RemoteServerName"" to the NNTP server during pull feeds.

NNTP..Push.Articles.Failed

Number

Number of failed news article transfers to server ""RemoteServerName"" by the NNTP server during push feeds.

|NNTP..Push.Articles.Offered|Number|Number of news articles offered to the server ""RemoteServerName"" by the NNTP server during push feeds.

NNTP..Push.Articles.Requested

Number

Number of news articles requested by the server ""RemoteServerName"" from the NNTP server during push feeds.

|NNTP..Push.Articles.Transfered|Number|Number of news articles transfered to the server ""RemoteServerName"" by the NNTP server during push feeds.

Object.Filename

Text

Name of single object mail file.

|Object.Mailobj.NSF.SharedBy.01|Number|Number of objects shared by 1 user.

Object.Mailobj.NSF.SharedBy.02

Number

Number of objects shared by 2 users.

|Object.Mailobj.NSF.SharedBy.03|Number|Number of objects shared by 3 users.

Object.Mailobj.NSF.SharedBy.04

Number

Number of objects shared by 4 users.

|Object.Mailobj.NSF.SharedBy.05|Number|Number of objects shared by 5 users.

Object.Mailobj.NSF.SharedBy.06

Number

Number of objects shared by 6 users.

|Object.Mailobj.NSF.SharedBy.07|Number|Number of objects shared by 7 users.

Object.Mailobj.NSF.SharedBy.08

Number

Number of objects shared by 8 users.

|Object.Mailobj.NSF.SharedBy.09|Number|Number of objects shared by 9 users.

Object.Mailobj.NSF.SharedBy.10

Number

Number of objects shared by 10 users.

|Object.Mailobj.NSF.SharedBy.11|Number|Number of objects shared by 11 users.

Object.Mailobj.NSF.SharedBy.12

Number

Number of objects shared by 12 users.

|Object.Mailobj.NSF.SharedBy.13|Number|Number of objects shared by 13 users.

Object.Mailobj.NSF.SharedBy.14

Number

Number of objects shared by 14 users.

|Object.Mailobj.NSF.SharedBy.15|Number|Number of objects shared by 15 users.

Object.Mailobj.NSF.SharedBy.16

Number

Number of objects shared by 16 users.

|Object.Mailobj.NSF.SharedBy.17|Number|Number of objects shared by 17 users.

Object.Mailobj.NSF.SharedBy.18

Number

Number of objects shared by 18 users.

|Object.Mailobj.NSF.SharedBy.19|Number|Number of objects shared by 19 users.

Object.Mailobj.NSF.SharedBy.20

Number

Number of objects shared by 20 users.

|Object.Mailobj.NSF.SharedBy.Greater|Number|Number of objects shared by more than 20 users.

Platform.ActiveNumOfDominoPartitions

Number

(Win32, Solaris, AIX, z/OS, and OS400) The number of active Domino partitions running on the server.

|Platform.LogicalDisk.TotalNumofDisks|Number|(Domino6 - Win32, Solaris, AIX, OS400, Linux(Intel), zLinux) The total number of local Logical Disks on the system.

Platform.LogicalDisk.Total.PctUtil

Number

(Domino6 - OS400) - The percentage of time the Logical Disks are busy servicing read or write requests. This represents the average value for all the local Logical Disk drives. Equivalents: Look in % Busy column in WRKDSKSTS.

|Platform.LogicalDisk.Total.PctUtil.Avg|Number|The running average of the total percentage of utilization for all Logical Disks on the system. 

Platform.LogicalDisk.Total.PctUtil.Peak

Number

The largest percentage utilization value for all Logical Disks

 since Domino server startup.

Platform.LogicalDisk..AssignedName

Text

(Domino6 - Win32, Solaris, AIX, Linux(Intel), zLinux) The name of the Logical Disk and its identifying instance number.

|Platform.LogicalDisk..AuxStoragePool|Number|(Domino6 - OS400) -  The number of the Auxiliary Storage Pool and its identifying instance number.  Auxiliary Storage Pool and Logical Disk are used synomously on OS400.

Platform.LogicalDisk..AvgQueueLen

Number

(Domino6 - Win32, Linux(Intel), zLinux) - The average number of read and write requests queued awaiting service on the Logical Disk. Equivalent in Win32: LogicalDisk Object/Avg. Disk Queue Length Counter in Perfmon for a given instance.

|Platform.LogicalDisk..AvgQueueLen.Avg|Number|The running average of the queue length for a Logical Disk since Domino server startup.    

Platform.LogicalDisk..AvgQueueLen.Peak

Number

The largest queue length value for a Logical Disk since Domino server startup.

Platform.LogicalDisk..PctUsed

Number

(Domino6 - OS400) - The percent of storage space in use on this Logical Disk Equivalent: % Used column in WRKDSKSTS

|Platform.LogicalDisk..PctUtil|Number|(Domino6 - Win32, Solaris, AIX, OS400, Linux(Intel), zLinux) The percentage of time that a Logical Disk is busy, servicing read or write requests.  Equivalents: WindowsNT - LogicalDisk Object/% Disk Time Counter in Perfmon for the given Logical Disk instance. Solaris - iostat -x, look under %b for percent of time the disk is busy (utilization). AIX - iostat -d, look under %tm_act for the same information. OS400 - Look in % Busy column in WRKDSKSTS.  

Platform.LogicalDisk..PctUtil.Avg	Number	The running average of the percentage of time the Logical Disk is busy.
Platform.LogicalDisk..PctUtil.Peak	Number	The largest value of

 percentage utilization for a Logical Disk since Domino server startup.  

Platform.LogicalDisk..ServiceTimeinmsecs

Number

(Domino6 - Solaris, Linux(Intel), zLinux) - The amount of time in milliseconds for a read or write command to complete on a single Logical Disk.

 Equivalent is iostat -x, look under svc_t  for the given disk instance.

Platform.LogicalDisk..ServiceTimeinmsecs.Avg

Number

The running average of the service time in milliseconds for a single Logical Disk, calculated by averaging all previously sampled intervals.

|Platform.LogicalDisk..ServiceTimeinmsecs.Peak|Number|The single largest value of the service time in milliseconds for a Logical Disk since server startup.

Platform.LogicalDisk._Total.1._Total.1.PctTime

Number

(R5 - WinNT, Solaris, and OS400) - The percentage of the sampling interval that all logical disks on all physical disks are servicing read or write requests.

 Equivalent to: Windows NT - LogicalDisk Object/% Disk Time Counter in Perfmon.  As in Perfmon, the first ""_Total"" refers to all physical disks, and the second ""_Total"" refers to all logical disks. Solaris - iostat -x,  look under %b for  percent time disk is busy (utilization).   

Platform.LogicalDisk._Total.1._Total.1.PctTime.avg	Number	The running average of the total percentage of time all Logical Disks on the system are servicing read or write requests.
Platform.LogicalDisk._Total.1._Total.1.PctTime.max	Number	The single largest value of the total percentage of time all Logical Disks on the system are servicing read or write requests.
Platform.LogicalDisk._Total.1._Total.1.PctTime.min	Number	The single smallest value of the total percentage of time all Logical Disks on the system are servicing read or write requests.
Platform.LogicalDisk._Total.1._Total.1.PctUsed	Number	(R5 - OS400) - The percentage of all configured disks in all ASPs that is currently allocated for data.

|Platform.LogicalDisk._Total.1._Total.1.PctUsed.avg|Number|The average of the percentage of all configured disks in all ASPs that is currently allocated for data.

Platform.LogicalDisk._Total.1._Total.1.PctUsed.max

Number

The single largest value of the percentage of all configured disks in all ASPs that is currently allocated for data.

|Platform.LogicalDisk._Total.1._Total.1.PctUsed.min|Number|The single smallest value of the percentage of all configured disks in all ASPs that is currently allocated for data.    

Platform.LogicalDisk._Total.1._Total.1.ServiceTime	Number	(R5 - Solaris) - The amount of time in milliseconds for a read or write command to complete. Equivalent to iostat -x, look under svc_t
Platform.LogicalDisk._Total.1._Total.1.ServiceTime.avg	Number	The running average of the service time for all Logical Disks since Domino server startup.

   

Platform.LogicalDisk._Total.1._Total.1.ServiceTime.max

Number

The single largest value of the service time for all Logical Disks since Domino server startup.

   

Platform.LogicalDisk._Total.1._Total.1.ServiceTime.min

Number

The single smallest value of the service time for all Logical Disks since Domino server startup.

Platform.LogicalDisk._Total.1_Total.1.AvgQueueLength

Number

(R5 - WinNT) -The average number of both read and write requests that were queued for all logical disks on all physical disks during the sample interval.

 Equivalent to LogicalDisk Object/Avg. Disk Queue Length Counter in Perfmon.   

Platform.LogicalDisk._Total.1_Total.1.AvgQueueLength.avg

Number

The running average queue length value for all Logical Disks since Domino server startup.

   

Platform.LogicalDisk._Total.1_Total.1.AvgQueueLength.max

Number

The single largest average queue length value for all Logical Disks since Domino server startup.

   

Platform.LogicalDisk._Total.1_Total.1.AvgQueueLength.min

Number

The single smallest average queue length value for all Logical Disks since Domino server startup.

Platform.Memory.AvailableFrameCount

Number

(Domino6 - z/OS) - Number of 4K frames of central storage (memory) available.

 Serious paging begins when this value gets close to zero.

Platform.Memory.AvailableFrameCount.Min

Number

The singel smallest value of Number of 4K frames of central storage (memory) available.

|Platform.Memory.AvailableFrameCount.Peak|Number|The single largest value of the number of 4K frames of central storage (memory) available. 

Platform.Memory.FaultsPerSec

Number

(OS400) - Memory faults per second.

|Platform.Memory.FaultsPerSec.avg|Number|Average number of memory faults per second.

Platform.Memory.FaultsPerSec.Avg

Number

The average number of Memory faults per second in the memory pool running Domino.

|Platform.Memory.FaultsPerSec.max|Number|Maximum number of memory faults per second.

Platform.Memory.FaultsPerSec.min

Number

Minimum number of memory faults per second.

|Platform.Memory.FaultsPerSec.Peak|Number|Maximum number of memory faults per second in the memory pool running Domino.

Platform.Memory.InQueue

Number

(Domino6 - z/OS) - Number of address spaces (processes) swapped into central storage.

|Platform.Memory.KBFree|Number|(R5 - WinNTand Solaris) - The amount in kilobytes of virtual memory available on the system.  Equivalent to:  Windows NT - Memory Object/AvailableBytes Counter in Perfmon divided by 1024. Solaris - vmstat,  memory free, in Kb/sec.

Platform.Memory.KBFree.avg

Number

The running average of the amount of physical memory available to processes running on the computer since the server started.

|Platform.Memory.KBFree.max|Number|The largest value of physical memory available to processes running on the computer,  since the server started. 

Platform.Memory.KBFree.min

Number

The single smallest value of physical memory available to processes running on the computer,

 since the server started.

Platform.Memory.KBSize

Number

(OS400) - The amount of memory in kilobytes allocated to the pool that this Domino partition is running in.

|Platform.Memory.KBSize.avg|Number|The average value of the amount of memory in kilobytes allocated to the pool that this Domino partition is running in.

Platform.Memory.KBSize.Avg

Number

The average value of the amount of memory in kilobytes allocated to the pool that this Domino partition is running in.

|Platform.Memory.KBSize.max|Number|The single largest value of the amount of memory in kilobytes allocated to the pool that this Domino partition is running in.

Platform.Memory.KBSize.min

Number

The single smallest value of the amount of memory in kilobytes allocated to the pool that this Domino partition is running in.

|Platform.Memory.KBSize.Peak|Number|The single largest value of the amount of memory in kilobytes allocated to the pool that this Domino partition is running in.

Platform.Memory.OutReadyQueue

Number

(Domino6 - z/OS) - Number of address spaces swapped out which are ready to run.

 Any value > 0 means that z/OS is forcing address spaces out against their will, and indicates a system constrained by Central Storage. 

Platform.Memory.OutReadyQueue.Avg	Number	The average number of address spaces swapped out which are ready to run.
Platform.Memory.OutReadyQueue.Min	Number	The minimum value of number of address spaces swapped out which are ready to run.

|Platform.Memory.OutReadyQueue.Peak|Number|The highest value of number of address spaces swapped out which are ready to run. 

Platform.Memory.OutWaitQueue

Number

(Domino6 - z/OS) - Number of address spaces swapped out because they are waiting for a resource.

 Being swapped out for wait is not an uncommon state, although it may indicate an I/O problem. 

Platform.Memory.OutWaitQueue.Avg	Number	The average number of address spaces swapped out because they are waiting for a resource.
Platform.Memory.OutWaitQueue.Min	Number	The mininun number of address spaces swapped out because they are waiting for a resource.

|Platform.Memory.OutWaitQueue.Peak|Number|The single largest number of address spaces swapped out because they are waiting for a resource.

Platform.Memory.PageHighUIC

Number

(Domino6 - z/OS) - Highest unreference interval count for any 4K page of storage.

 Values range from 254 down to zero, with low counts indicating that the least used page of storage is referenced often.  Indicates how heavily used the data in storage really is.

Platform.Memory.PagesFreedPerSec

Number

(Domino6 - AIX) - The number of memory pages freed for memory reuse. Equivalent in AIX: vmstat 1 2, look under fr

|Platform.Memory.PagesFreedPerSec.Avg|Number|The running average of the number of memory pages freed for memory reuse.  

Platform.Memory.PagesFreedPerSec.Peak	Number	The peak value of the number of memory pages per second freed for memory reuse.
Platform.Memory.PagesPerSec	Number	(Win32, Solaris, z/OS, OS400, Linux(Intel), zLinux) - The number of pages per second, read from or written to the disk, that were not available in memory.

 z/OS - Page-ins per second for demand paging to DASD (disk).  Some paging to DASD is normal. OS400 - The pages swapped in the memory pool that is running Domino. Tip: A high value for this statistic could imply that the system is thrashing, leading to degraded server performance.  Equivalents:  Win32 - Memory Object/Pages/Second Counter in Perfmon. Solaris (R5 ONLY) - vmstat,  add pi and po on to get total pages. AIX (Domino 6 and later) - vmstat 1 2, and add values under pi and po to get the total pages. OS400 - Sum of DB Pages and Non-DB Pages for Domino's memory pool in WRKSYSSTS.

Platform.Memory.PagesPerSec.Avg

Number

The running average of the number of pages per second accessed from the disk since Domino server startup.

|Platform.Memory.PagesPerSec.avg|Number|The running average of the number of pages per second accessed from the disk since Domino server startup.  

Platform.Memory.PagesPerSec.max

Number

The single largest value of the number of pages per second since Domino server startup.

|Platform.Memory.PagesPerSec.min|Number|The single smallest value of the number of pages per second since Domino server startup.

Platform.Memory.PagesPerSec.Peak

Number

The largest value of the number of pages per second since Domino server startup.

|Platform.Memory.RAM.AvailMBytes|Number|(Domino6 - Win32, Solaris, AIX, Linux(Intel), zLinux) - The amount in Megabytes of physical memory available on the system.  Equivalents:  WindowsNT - Memory Object/AvailableBytes Counter in Perfmon divided by 1024. Solaris - Console command vmstat shows memory free  in Kilobytes AIX - vmstat shows available memory in terms of 4K pages

Platform.Memory.RAM.AvailMBytes.Avg

Number

The running average number of megabytes free on the system.

|Platform.Memory.RAM.AvailMBytes.Min|Number|The minimum value of the number of megabytes that are free.

Platform.Memory.RAM.AvailMBytes.Peak

Number

The largest value of the amount of memory in megabytes that are free, on the system since Domino startup.

|Platform.Memory.RAM.PctUtil|Number|(Domino6 - Win32, Solaris, AIX, Linux(Intel), zLinux) - The percentage of physical memory utilized.

Platform.Memory.RAM.TotalMBytes

Number

(Domino6 - Solaris, Win32, OS400, AIX, Linux(Intel), zLinux) - The total amount of physical memory in megabytes on the system. OS400 - Only includes the RAM assigned to the memory pool that is running Domino.

|Platform.Memory.ScanRatePagesPerSec|Number|(Domino6 - Solaris, and AIX) - Free pages scanned by the page scanner every second to reclaim memory for system use.  Tip: If the ratio value of scan rate to pages freed per second is greater than 6, memory may be constrained on the system and should be investigated.  Equivalent: Solaris and AIX -  use vmstat 60 and then look in the ""page"" column for ""sr"". This gives the number of free page scanned over the last minute.

Platform.Memory.ScanRatePagesPerSec.Avg

Number

The running average for the page scan rate.

|Platform.Memory.ScanRatePagesPerSec.Peak|Number|The single largest value of the page scan rate since Domino startup.

Platform.Memory.WaitToIneligible

Number

(OS400) - Number of Wait To Ineligible transitions in the memory pool running Domino. Equivalent: Wait->Inel Transitions for Domino

's memory pool in WRKSYSSTS.

Platform.Network.ActiveNetworkAdapters

Number

(Domino6 - OS400) - The total number of active line descriptions (adapters) in the system. Equivalents: OS400:

'wrkcfgsts *lin' shows a list all active adapters.

Platform.Network.TotalNumofAdapters

Number

(Domino6 - Solaris, Win32, AIX, Linux(Intel), zLinux) - The total number of adapters in the system. Note: The loopback interface was excluded from our calculations since it is not a physical adapter.

 Equivalents: Win32 - Network Interface Object/Look at the total number of adapter instances. Solaris - netstat -i, and then count the number of adapters.  AIX - Complicated. Do a netstat -v ad count all the adapters that are actually on line.

Platform.Network.Total.BytesRecvdPerSec

Number

(Domino6 - Solaris, Win32, OS400, AIX, Linux(Intel), zLinux) - The total number of bytes received per second by all adapters in the system. Cumulative network statistic counters are not provided on Win32 and Solaris. Add individual values to get the total statistics.

 OS400 - Only the adapters listed by platform stats are included in the total.

Platform.Network.Total.BytesSentPerSec

Number

(Domino6 - Solaris, Win32, OS400, AIX, Linux(Intel), zLinux) - The total number of bytes sent per second by all adapters in the system.

 OS400 - Only the adapters listed by platform stats are included in the total.

Platform.Network.Total.CurrBandwidthMbitsPerSec

Number

(Domino6 - Solaris, Win32, OS400, and AIX) - The total theoretical maximum bandwidth for all adapters in the system. OS400 - Only bandwidth for Token Ring and Ethernet lines are reported. Only the adapters listed by platform stats are included in the total.

|Platform.Network.Total.NetworkBytesPerSec|Number|(Domino6 - Solaris, Win32, OS400, AIX, Linux(Intel), zLinux) - The total number of bytes received and sent per second by all adapters in the system. OS400 - Only the adapters listed by platform stats are included in the total.

Platform.Network.Total.PctCollisionRate

Number

(Domino6 - Solaris, AIX, Linux(Intel), zLinux) - The number of packet collisions as a percentage of the total number of packets transmitted by all adapters in the system.

 Tip: A collision rate greater than 2% indicates a degradation in network performance. Possible causes are failures in the network adapters or  improperly configured network elements in the segment.  Equivalents: Solaris - netstat -k [interval] for all adapter instances. Look for collisions and ipackets.  Convert values to percentages.  AIX - netstat -v and look for collisions. The platform statistic is the collision rate..

Platform.Network.Total.PctUtilBandwidth

Number

(Domino6 - Solaris, Win32, OS400, and AIX) - The percentage of utilized bandwidth for all adapters in the system. OS400 - Only bandwidth for Token Ring and Ethernet lines are reported. Only the adapters listed by platform stats are included in the total.

|Platform.Network..Active|Number|(Domino6 - OS400) - ""YES"" if the Line Description for this instance is active.

Platform.Network..AdapterName

Text

(Domino6 - Solaris, Win32, OS400, AIX, Linux(Intel), zLinux) - The name of the individual network card and an identifying instance number. OS400: This is the name of a line description.

 Use the adapter and line description synomously. Equivalents: Win32 - Network Interface Object/ select given an Adapter Instance. Solaris - netstat -i lists all network adapters. AIX- netstat -v lists all network adapters. OS400 - wrkcfgsts *lin. 

Platform.Network..BytesRecvd	Number	(Domino6 - OS400) - The Bytes recieved since last system restart (IPL)
Platform.Network..BytesRecvdPerSec	Number	(Domino6 - Solaris, Win32, OS400, AIX, Linux(Intel), zLinux) - The number of bytes per second received through this adapter. Equivalents: Win32 - Network Interface Object/Bytes Received/sec counter for the given adapter instance. Solaris - netstat -k

 [adapter name], for example netstat -k hme0 looks for the field rbytes. AIX - netstat -v. Look under received bytes.

Platform.Network..BytesSent

Number

(Domino6 - OS400) - The bytes sent since last system restart (IPL). Note: Values will wrap back to 0 after 2 or 4 GB.

|Platform.Network..BytesSentPerSec|Number|(Domino6 - Solaris, Win32, OS400, AIX, Linux(Intel), zLinux) - The number of bytes per second that have been transmitted through this adapter. Equivalents: Win32 - Network Interface Object/Bytes Sent/sec  counter for the given adapter instance. Solaris - netstat -k [interval] adapter name, for  example netstat -k 60 hme0 looks for the field obytes. AIX - netstat -v. Look under transmitted bytes.

Platform.Network..CurrBandwidthMbitsPerSec

Number

(Domino6 - Solaris, Win32, OS400, and AIX) - The current theoretical maximum bandwidth, in Mbits per second, of this adapter. This value changes depending on the type of network segment the server is currently attached to. Equivalents: Win32 - Network Interface Object/Current Bandwidth counter for the given adapter instance. Solaris

 - netstat -k [interval] adapter name, for example netstat -k -60 hme0 looks for the field ifspeed. AIX - netstat -v. If present, this field is called ""Media Speed Running."". OS400 - dsplind .  Only bandwidth for Token Ring and Ethernet lines are reported. 

Platform.Network..PctCollisionRate	Number	(Domino6 - Solaris, AIX, Linux(Intel), zLinux) - The number of packet collisions as a percentage of the total number of packets transmitted by the adapter.
Platform.Network..PctUtilBandwidth	Number	(Domino6 - Solaris, Win32, OS400, and AIX) - The percentage of utilized bandwidth defined as the total number of bytes sent and received as a fraction of the theoretical maximum bandwidth of this adapter.

 No equivalents available on Win32, Solaris, OS400, or AIX. We have calculated this for you! OS400 -  Only bandwidth for Token Ring and Ethernet lines are reported.

Platform.Network..TotalBytesPerSec

Number

(Domino6 - Solaris, Win32, OS400, AIX, Linux(Intel), zLinux) - The total number of bytes per second sent and received through this adapter.

 Equivalents: Win32 - Network Interface Object/Bytes Total/sec counter for the given adapter instance. Solaris - netstat -k [adapter name], for example netstat -k -60 hme0 adds the values for obytes and rbytes. AIX - Add the values obtained via netstat -v for transmitted and received bytes.

;

;

;

|Platform.Pagingfile.Free.SizeMBytes|Number|(Domino 6 - Linux(Intel) and zLinux) ""The current amount of  free swap space available, in megabytes.""

Platform.PagingFile.Total.PctUtil

Number

(Domino6 - Solaris, Win32, AIX, Linux(Intel), zLinux) - The percentage utilization rate of all the paging files on the system during the sample interval.

|Platform.PagingFile.Total.PctUtil.Avg|Number|The running average of the total percentage of utilization of all the paging files on the system since Platform Stats were enabled.

Platform.PagingFile.Total.PctUtil.Peak

Number

The largest percentage utilization value of all the paging files on the system since Platform Stats were enabled.

|Platform.Pagingfile.Total.SizeMBytes|Number|(Domino 6 - Linux(Intel) and zLinux) ""The total size of the swap space, in megabytes.""

Platform.Process.ActiveDomino.TotalCpuUtil

Number

(Domino6 - Solaris, Win32, OS400, z/OS, and AIX) - The total CPU utilization of all the Domino processes on the server. Note: These numbers are approximate and are only indicative of how busy the process is. Do not attempt to sum them to a 100 % utilization.

|Platform.Process.ActiveNumOfDominoProc|Number|(Domino6 - Solaris, Win32, OS400, z/OS, and AIX) The number of the Domino Processes currently running on the server.        

Platform.Process.ADMINP.1.Util	Number	(R5 - OS400) - The CPU utilization of the first adminp process of this partition.
Platform.Process.AMGR.1.Util	Number	(R5 - OS400) - The CPU utilization of the first agent manager process of this partition.
Platform.Process.AMGR.2.Util	Number	(R5 - OS400) - The CPU utilization of the second agent manager process of this partition.
Platform.Process.AMGR.3.Util	Number	(R5 - OS400) - The CPU utilization of the third agent manager process of this partition.
Platform.Process.AMGR.4.Util	Number	(R5 - OS400) - The CPU utilization of the third agent manager process of this partition.
Platform.Process.HTTP.1.Util	Number	(R5 - OS400) - The CPU utilization of the first http process of this partition.
Platform.Process.nadminp.1.Util	Number	(R5 - WinNT) - The CPU utilization of the first adminp process. Equivalent to Process Object/% Processor Time/nadminp Counter in Perfmon.

|Platform.Process.nadminp.2.Util|Number|(R5 - WinNT) - The CPU utilization of the second adminp process. Equivalent to Process Object/% Processor Time/nadminp Counter in Perfmon.

Platform.Process.nadminp.3.Util

Number

(R5 - WinNT) - The CPU utilization of the third adminp process. Equivalent to Process Object/% Processor Time/nadminp Counter in Perfmon.

|Platform.Process.nadminp.4.Util|Number|(R5 - WinNT) - The CPU utilization of the fourth adminp process. Equivalent to Process Object/% Processor Time/nadminp Counter in Perfmon.

Platform.Process.namgr.1.Util

Number

(R5 - WinNT) - The CPU utilization of the first amgr process. Equivalent to Process Object/% Processor Time/namgr Counter in Perfmon.

|Platform.Process.namgr.2.Util|Number|(R5 - WinNT) - The CPU utilization of the second amgr process. Equivalent to Process Object/% Processor Time/namgr Counter in Perfmon.

Platform.Process.namgr.3.Util

Number

(R5 - WinNT) - The CPU utilization of the third amgr process. Equivalent to Process Object/% Processor Time/namgr Counter in Perfmon.

|Platform.Process.namgr.4.Util|Number|(R5 - WinNT) - The CPU utilization of the fourth amgr process. Equivalent to Process Object/% Processor Time/namgr Counter in Perfmon.

Platform.Process.nhttp.1.Util

Number

(R5 - WinNT) - The CPU utilization of the first http process. Equivalent to Process Object/% Processor Time/nhttp Counter in Perfmon.

|Platform.Process.nhttp.2.Util|Number|(R5 - WinNT) - The CPU utilization of the second http process. Equivalent to Process Object/% Processor Time/nhttp Counter in Perfmon.

Platform.Process.nhttp.3.Util

Number

(R5 - WinNT) - The CPU utilization of the third http process. Equivalent to Process Object/% Processor Time/nhttp Counter in Perfmon.

|Platform.Process.nhttp.4.Util|Number|(R5 - WinNT) - The CPU utilization of the fourth http process. Equivalent to Process Object/% Processor Time/nhttp Counter in Perfmon.

Platform.Process.nreplica.1.Util

Number

(R5 - WinNT) - The CPU utilization of the first replica process. Equivalent to Process Object/% Processor Time/nreplica Counter in Perfmon.

|Platform.Process.nreplica.2.Util|Number|(R5 - WinNT) - The CPU utilization of the second replica process. Equivalent to Process Object/% Processor Time/nreplica Counter in Perfmon.

Platform.Process.nreplica.3.Util

Number

(R5 - WinNT) - The CPU utilization of the third replica process. Equivalent to Process Object/% Processor Time/nreplica Counter in Perfmon.

|Platform.Process.nreplica.4.Util|Number|(R5 - WinNT) - The CPU utilization of the fourth replica process. Equivalent to Process Object/% Processor Time/nreplica Counter in Perfmon.

Platform.Process.nrouter.1.Util

Number

(R5 - WinNT) - The CPU utilization of the first router process. Equivalent to Process Object/% Processor Time/nrouter Counter in Perfmon.

|Platform.Process.nrouter.2.Util|Number|(R5 - WinNT) - The CPU utilization of the second router process. Equivalent to Process Object/% Processor Time/nrouter Counter in Perfmon.

Platform.Process.nrouter.3.Util

Number

(R5 - WinNT) - The CPU utilization of the third router process. Equivalent to Process Object/% Processor Time/nrouter Counter in Perfmon.

|Platform.Process.nrouter.4.Util|Number|(R5 - WinNT) - The CPU utilization of the fourth router process. Equivalent to Process Object/% Processor Time/nrouter Counter in Perfmon.

Platform.Process.nserver.1.Util

Number

(R5 - WinNT) - The CPU utilization of the first server process. This is the percentage of the sample interval that the process used the CPU.

 Equivalent to Process Object/% Processor Time/nserver Counter in Perfmon.

Platform.Process.nupdate.1.Util

Number

(R5 - WinNT) - The CPU utilization of the first update process. Equivalent to Process Object/% Processor Time/nupdate Counter in Perfmon.

|Platform.Process.nupdate.2.Util|Number|(R5 - WinNT) - The CPU utilization of the second update process. Equivalent to Process Object/% Processor Time/nupdate Counter in Perfmon.

Platform.Process.nupdate.3.Util

Number

(R5 - WinNT) - The CPU utilization of the third update process. Equivalent to Process Object/% Processor Time/nupdate Counter in Perfmon.

|Platform.Process.nupdate.4.Util|Number|(R5 - WinNT) - The CPU utilization of the fourth update process. Equivalent to Process Object/% Processor Time/nupdate Counter in Perfmon.          

Platform.Process.REPLICA.1.Util	Number	(R5 - OS400) - The CPU utilization of the first replica process of this partition.
Platform.Process.REPLICA.2.Util	Number	(R5 - OS400) - The CPU utilization of the second replica process of this partition.
Platform.Process.REPLICA.3.Util	Number	(R5 - OS400) - The CPU utilization of the third replica process of this partition.
Platform.Process.REPLICA.4.Util	Number	(R5 - OS400) - The CPU utilization of the fourth replica process of this partition.
Platform.Process.ROUTER.1.Util	Number	(R5 - OS400) - The CPU utilization of the first router process of this partition.
Platform.Process.SERVER.1.Util	Number	(R5 - OS400) - The CPU utilizationof the first server process of this partition. This is the percentage of the sample interval that the process used the CPU.
Platform.Process.UPDATE.1.Util	Number	(R5 - OS400) - The CPU utilization of the first update process of this partition.
Platform.Process.UPDATE.2.Util	Number	(R5 - OS400) - The CPU utilization of the second update process of this partition.
Platform.Process.UPDATE.3.Util	Number	(R5 - OS400) - The CPU utilization of the third update process of this partition.
Platform.Process.UPDATE.4.Util	Number	(R5 - OS400) - The CPU utilization of the fourth update process of this partition.
Platform.Process...CurrentLocation	Number	(Domino6 - z/OS) - Indicates where this address space is located, and why (eg. swapped in, swapped out and ready, etc.).

 Swapped in should be the normal state, and any other kind of state should generally be considered a problem.  Assign numeric values, with 0==""In"", allowing for threshold checking.

Platform.Process...DominoLocalFreeKBytes

Number

(Domino6) - Total amount of Domino Process Global (local) memory available to the process

|Platform.Process...DominoSharedFreeKBytes|Number|(Domino6) - Total amount of Domino Shared Pool memory available to the process

Platform.Process...HeapFreeKBytes

Number

(Domino6 - AIX) - Total amount of process heap memory available for allocation by the process

|Platform.Process...JobNumber|Number|(Domino6 - OS400) - A number that uniquely identifies a process.  This statistic can be used to gather more information about this specific job process. Equivalent:  OS400 - WRKDOMSVR, then enter Option 9 next to the desired server.  It will show all the jobs running in the Domino partition. 

Platform.Process...MemFreeKBytes

Number

(Domino6 - Solaris, Win32, OS400, z/OS) - Total amount of system memory available for allocation by the process

|Platform.Process...PctCpuUtil|Number|(Domino6 - Solaris, Win32, OS400, z/OS, and AIX) - The percentage of CPU utilization by this process in the given sampling interval.  Equivalents: Win32 - Process Object/%Processor Time/nadminp instance. Solaris and AIX - No real equivalent. Doing a ps -ef gives you process times, but not %CPU utilization. OS400 - WRKACTJOB lists all processes and CPU used.

Platform.Process...ProcessID

Number

(Domino6 - Solaris, Win32, AIX, OS400 and z/OS) - The number that uniquely identifies a process.

|Platform.Process...SharedFreeKBytes|Number|(Domino6 - AIX) - Total amount of shared memory available for allocation by the process

Platform.System.ContextSwitchesPerSec

Number

(Domino6 - Solaris, Win32, AIX, Linux(Intel), zLinux) - The number of context switches per second that take place between all the threads in the system. These threads are not limited to the ones owned by Domino Processes, but

 belong to all the processes on the system. Equivalents: Win32 - System Object / Context Switches/sec counter. Solaris and AIX - Use vmstat -60 to get statistics for the last  minute, as opposed to stats since system startup. Read the value for cs under CPUfor context switches made in the last 60 seconds. Divide that value by 60 for the per second rate.   Tip:  A large context switch rate may imply that server performance is starting to degrade due to insufficient memory and a large number of applications running, or due to high I/O  wait times.

Platform.System.ContextSwitchesPerSec.Avg

Number

The running average number of the number of context switches per second on the system.

|Platform.System.ContextSwitchesPerSec.Min|Number|The smallest value of the context switch rate since Domino startup. 

Platform.System.ContextSwitchesPerSec.Peak	Number	The largest value of context switch rate since Domino startup.
Platform.System.CPUQueueLen	Number	(Domino6 - Solaris, and AIX) - The total number of threads (processes on Solaris) waiting for execution in a system-wide queue. This queue is shared among multiple processors, if any, in the system. Equivalents: Win NT - System Object / Processor Queue Length Counter.

 Solaris and AIX -  Use vmstat -60 and look under 'r' in the procs column. Tip: A large value for this statistic in conjunction with unusually high values for other system stats may indicate congestion in the system leading to poor Domino performance.

Platform.System.CPUQueueLen.Avg

Number

The running average of the number of processes waiting for execution.

|Platform.System.CPUQueueLen.Min|Number|The smallest number of processes that were waiting to run, since Domino startup.

Platform.System.CPUQueueLen.Peak

Number

The largest value for the number of processes waiting for execution since Domino startup.

|Platform.System.LPARPctCpuUtil|Number|(Domino6 - z/OS) - Logical Partition (LPAR) view of CPU utilization. This is an instantaneous measurement.  This diverges from the MVS version when an LPAR exceeds 100% of the share of the CPUs it is allocated1.   

Platform.System.LPARPctCpuUtil.Avg	Number	z/OS ONLY - The average Logocal Partition (LPAR) view of CPU utilization.
Platform.System.LPARPctCpuUtil.Peak	Number	The single largest value of the Logocal Partition (LPAR) view of CPU utilization.
Platform.System.PctCombinedCpuUtil	Number	(Domino6 - Solaris, Win32, OS400, z/OS, AIX, Linux(Intel), zLinux) The total CPU percentage utilization for all CPUs in the system. On Solaris and AIX this value equals the combined Platform.System.PctTotalPrivilegedCpuUtil and Platform.System.PctTotalUserCpuUtil values. z/OS - MVS view of CPU utilization.

   This is how much of the CPU that the operating system thinks it is using, and is what would be considered total CPU uitilization for other platforms. Equivalents: WinNT - System Object/% Total Processor Time Counter in Perfmon. Win2K - Processor Object / % Total Processor Time Counter in Perfmon. Solaris - iostat -C, add percentage of time in user mode and system mode to get the total CPU  utilization. AIX - Use iostat -t. OS400 - WRKSYSSTS, see 'CPU %' 

Platform.System.PctCombinedCpuUtil.Avg

Number

The running average of the percent of CPU utilization of all CPUs on the system.

|Platform.System.PctCombinedCpuUtil.Peak|Number|The largest CPU percentage utilization for all CPUs on the system since Domino startup.

Platform.System.PctTotalPrivilegedCpuUtil

Number

(Domino6 - Solaris, Win32, AIX, Linux(Intel), zLinux) - The total CPU percentage utilization in privileged (kernel) mode of all CPUs in the system.

 Equivalents: Win NT - System Object/% Total Privileged Time Counter in Perfmon. Win2K - Processor Object / % Total Privileged Time Counter in Perfmon. Solaris -  iostat -C, use %time spent in system (kernel) mode. AIX - Use iostat -t.

Platform.System.PctTotalPrivilegedCpuUtil.Avg

Number

The running average of the percentage CPU utilization in privileged (kernel) mode of all CPUs in the system.

|Platform.System.PctTotalPrivilegedCpuUtil.Peak|Number|The largest CPU percentage utilization in  privileged mode for all CPUs in the system since server startup.

Platform.System.PctTotalUserCpuUtil

Number

(Domino6 - Solaris, Win32, AIX, Linux(Intel), zLinux) - The total CPU percentage utilization running in the user mode of all CPUs in the system.

 Equivalents: WinNT -  System Object /% Total User Time Counter in Perfmon. Win2K - Processor Object / % Total User Time Counter in Perfmon. Solaris - iostat -C, use %time spent in user mode. AIX - iostat -t

Platform.System.PctTotalUserCpuUtil.Avg

Number

The running average of

 the CPU percentage utilization in user mode of all CPUs in the system.

Platform.System.PctTotalUserCpuUtil.Peak

Number

The single largest CPU percentage utilization in user mode of all CPUs in the system since Domino startup.

|Platform.System.TotalNumProcs|Number|(Domino 6 - zOS) - The total number of running processes on the system (LPAR).

Platform.System.TotalNumProcs.Avg

Number

(Domino 6 - zOS)

 The average total number of running processes on the system (LPAR).

Platform.System.TotalNumProcs.Peak

Number

(Domino 6 - z/OS) The single highest value of the total number of running processes on the system (LPAR).

|Platform.System.TotalPrivUtil|Number|(R5 - Win NTand Solaris) - The average percent CPU utilization in privileged mode of all CPU's on the system. Equivalent to: Windows NT - System Object/% Total Privileged Time Counter in Perfmon. Solaris -  iostat -c,  use %time spent in system (kernel) mode.

Platform.System.TotalPrivUtil.avg

Number

The running average of the percentage CPU utilization in privileged mode of all CPUs in the system.

|Platform.System.TotalPrivUtil.max|Number|The single largest CPU percentage utilization in  privileged mode for all CPUs in the system since server startup.

Platform.System.TotalPrivUtil.min

Number

The single smallest value of percentage of CPU utilization in

 privileged mode of all CPUs in the system since Domino startup.

Platform.System.TotalUserUtil

Number

(R5 - Win NTand Solaris) - The average percent CPU utilization in user mode of all CPU

's on the system. Equivalent to: Windows NT - System Object/% Total User Time Counter in Perfmon. Solaris -  iostat -c,   use %time spent in user mode.

Platform.System.TotalUserUtil.avg

Number

The running average of

 the CPU percentage utilization in user mode of all CPUs in the system.

Platform.System.TotalUserUtil.max

Number

The single largest CPU percentage utilization in user mode of all CPUs in the system since Domino startup.

|Platform.System.TotalUserUtil.min|Number|The single smallest value of CPU percentage utilization in user mode of all CPUs in the system since Domino startup.

Platform.System.TotalUtil

Number

(R5 - Win NT, Solaris, and OS400) -The average percent CPU utilization of all CPU

's on the system.  Equivalent to: Windows NT - System Object/% Total Processor Time Counter in Perfmon. Solaris - iostat -c,  add % time in user mode & system mode to get total % utilization.

Platform.System.TotalUtil.avg

Number

The running average of the percent of CPU utilization of all CPUs on the system.

|Platform.System.TotalUtil.max|Number|The largest CPU percentage utilization for all CPUs on the system since Domino startup.

Platform.System.TotalUtil.min

Number

The single smallest value of CPU percentage utilization of all CPUs on the system since Domino startup.

|Platform.Time.LastSample|Number|(Domino6 - Solaris, Win32, OS400, zOS, AIX, Linux(Intel), zLinux) - The Month/Day/Year /Hour/Minute/Second and TimeZone of the most recent update of platform stats. 

Platform.Time.SampleRateInMins

Number

(Domino6 - Solaris, Win32, zOS, AIX, Linux(Intel), zLinux) - The sampling rate of platform statistics (update interval).

|POP3.Command.|Text|POP3 Command

POP3.Sessions.Accept.Queue

Number

POP3. listener work queue of incoming sessions to be processed

|POP3.Sessions.Active|Number|Current number POP3. server tasks server

POP3.Sessions.Inbound.BytesReceived

Number

Total Number of BytesReceived by this POP3

POP3.Sessions.Inbound.BytesSent

Number

Total Number of BytesSent by this POP3 server

|POP3.Sessions.Inbound.Non-SSL|Number|Number of POP3 server inbound TCP connections (non SSL)

POP3.Sessions.Inbound.SSL

Number

Number of POP3 server inbound SSL connections

|POP3.Sessions.Inbound.SSL.Bad_Handshake|Number|Number of POP3 server  SSL Handshake Failures

POP3.Sessions.Inbound.Total

Number

Total Number of POP3 server inbound connections (SSL & non SSL)

|POP3.Sessions.Peak|Number|Peak number POP3 server tasks since server startup

POP3.Sessions.Threads.Busy

Number

Number of POP3 server tasks currently running

|POP3.Sessions.Threads.Idle|Number|Number of POP3 server tasks currently idle

POP3.Sessions.Total

Number

Total number POP3 server tasks since server startup

|POP3.UserCache.Attempts|Text|POP3 attempt to find user in cache

POP3.UserCache.Hits

Text

Found in cache

|POP3.UserCache.Inserts|Text|Successful insert into cache

POP3.UserCache.Lookups

Text

POP3 successful lookup user in cache

|POP3.UserCache.OpenReasonCacheFull|Text|Cache full

POP3.UserCache.OpenReasonDBChanged

Text

Reason for open is db changed

|POP3.UserCache.OpenReasonNewEntry|Text|Reason for open is new entry

QOS.Mail.ISpy.ProbeError

Text

Mail Probe Error

|QOS.Mail.ISpy..ResponseTime|Number|Mail Probe response time

QOS....ResponseTime

Number

TCP Probe response time

|Replica.Cluster.CachedHandles|Number|Number of handles cached by cluster.

Replica.Cluster.Docs.Added

Number

Number of docs added by cluster replicator.

|Replica.Cluster.Docs.Deleted|Number|Number of docs deleted by cluster replicator.

Replica.Cluster.Docs.Updated

Number

Number of docs updated by cluster replicator.

|Replica.Cluster.Failed|Number|Number of failed replications since server startup. 

Replica.Cluster.Files.Local

Number

Number of cluster replicas on this server.

|Replica.Cluster.Files.Remote|Number|Number of cluster replicas on other servers in cluster.

Replica.Cluster.Retry.Skipped

Number

Number of times the Cluster Replicator did not attempt replication because it knew the server was unreachable or the database inaccessible

|Replica.Cluster.Retry.Waiting|Number|Number of replicas currently waiting for replication retry attempts.

Replica.Cluster.SecondsOnQueue

Number

Number of seconds Cluster Replictor was on queue.

|Replica.Cluster.SecondsOnQueue.Avg|Number|Average number of seconds Cluster Replictor was on queue.

Replica.Cluster.SecondsOnQueue.Max

Number

Maximum number of seconds Cluster Replictor was on queue.

|Replica.Cluster.Servers|Number|Number of other servers in the cluster that are receiving replications from this server

Replica.Cluster.SessionBytes.In

Number

Number of incoming bytes to the Cluster Replicator.

|Replica.Cluster.SessionBytes.Out|Number|Number of outgoing bytes to the Cluster Replicator.

Replica.Cluster.Successful

Number

Number of successful replications since server startup.

|Replica.Cluster.WorkQueueDepth|Number|Current number of modified databases in the queue waiting to be replicated by the Cluster Replicator to other servers.   

Replica.Cluster.WorkQueueDepth.Avg	Number	Average number of modified databases in the queue waiting to be replicated by the Cluster Replicator to other servers.
Replica.Cluster.WorkQueueDepth.Max	Number	Maximum number of modified databases in the queue waiting to be replicated by the Cluster Replicator to other servers.
Replica.Docs.Added	Number	Number of documents added to the server

's databases via replication

Replica.Docs.Deleted

Number

Number of documents deleted from the server

's databases via replication

Replica.Docs.Updated

Number

Number of documents updated in the server

's databases via replication

Replica.Failed

Number

Number of attempted replications that returned some kind of error.

|Replica.Successful|Number|Number of replication attempts that returned no error of any kind.

Reporter.Time.Analysis

Time

Time stats were analyzed

|Reporter.Time.Collected|Time|Time stats were collected

Reporter.Time.Elapsed

Time

Time since reporter was started

|SEM.Timeouts|Text|OS Sem timeout

Server.Administrators

Text

Name(s) of the full and normal access administrator(s) (from the server record in the Domino Directory).

|Server.Administrators.Access|Text|Name(s) of the administrator(s) (from the server record in the Domino Directory).

Server.Administrators.BrowserAccess

Text

Name(s) of the browser access administrator(s) (from the server record in the Domino Directory).

|Server.Administrators.DatabaseAccess|Text|Name(s) of the database administrator(s) (from the server record in the Domino Directory).

Server.Administrators.FullAccess

Text

Name(s) of the full access administrator(s) (from the server record in the Domino Directory).

|Server.Administrators.NNTPAccess|Text|Name(s) of the NNTP access administrator(s) (from the server record in the Domino Directory).

Server.Administrators.RemoteAccess

Text

Name(s) of the full remote console administrator(s) (from the server record in the Domino Directory).

|Server.Administrators.RestrictedSystemAccess|Text|Name(s) of the restricted system administrator(s) (from the server record in the Domino Directory).

Server.Administrators.SystemAccess

Text

Name(s) of the system administrator(s) (from the server record in the Domino Directory).

|Server.Administrators.ViewOnlyAccess|Text|Name(s) of the view-only administrator(s) (from the server record in the Domino Directory).

Server.AvailabilityIndex

Number

Current percentage index of a server

's availability. Value range is 0-100. Zero (0) indicates no available resources a value of 100 indicates server completely available."

Server.AvailabilityThreshold

Number

Current setting of a server

's availability threshold. When a server's availability index drops below its availability threshold, the server becomes BUSY.

Server.BootID

Number

Unique number identifying this boot session.

|Server.BusyTimeQuery.ReceivedCount|Number|Number of queries to busytime in scheduling.

Server.BusyTimeQuery.Returned.Objects.Schedules

Number

Number of responses to queries to busytime in scheduling.

|Server.Cluster.AvailabilityIndex|Number|Current percentage index of a server's availability. Value range is 0-100. Zero (0) indicates no available resources a value of 100 indicates server completely available."

Server.Cluster.AvailabilityThreshold

Number

Current setting of a server

's availability threshold. When a server's availability index drops below its availability threshold, the server becomes BUSY.

Server.Cluster.Name

Number

Name of the cluster to which the server belongs

|Server.Cluster.OpenRedirects.FailoverByPath.Successful|Number|Number of times a server successfully redirects a client to another cluster member after the client fails to open a database by pathname.

Server.Cluster.OpenRedirects.FailoverByPath.Unsuccessful

Number

Number of times a server

 is not able to redirect a client to another cluster member after the client fails to open a database by pathname.

Server.Cluster.OpenRedirects.Failover.Successful

Number

Number of times that a server successfully redirects a client to another cluster member after the client fails to open a database by replica ID.

|Server.Cluster.OpenRedirects.Failover.Unsuccessful|Number|Number of times that a server is not able to redirect a client to another cluster member after the client fails to open a database by replica ID.

Server.Cluster.OpenRedirects.LoadBalanceByPath.Successful

Number

Number of times that a server successfully redirects a client to another cluster member after the client tries to open a database by pathname when the server is BUSY.

|Server.Cluster.OpenRedirects.LoadBalanceByPath.Unsuccessful|Number|Number of times that a server is not able to redirect a client to another cluster member after the client tries to open a database by pathname when the server is BUSY.

Server.Cluster.OpenRedirects.LoadBalance.Successful

Number

Number of times that a server successfully redirects a client to another cluster member after the client tries to open a database by replica ID when the server is BUSY.

|Server.Cluster.OpenRedirects.LoadBalance.Unsuccessful|Number|Number of times that a server is unable to redirect a client to another cluster member after the client tries to open a database by replica ID when the server is BUSY.

Server.Cluster.OpenRequest.ClusterBusy

Number

Number of times that a client tries to open a database on the server when the server is BUSY, and on every available member also.

|Server.Cluster.OpenRequest.DatabaseOutOfService|Number|Number of times a client tries to open a database that is marked as out of service on the server

Server.Cluster.OpenRequest.LoadBalanced

Number

Number of times a client tries to open a database on the server when the server is BUSY.

|Server.Cluster.Portname|Text|Name of the default port that is used for intracluster network traffic. An asterisk indicates that there is no default port and that any available active port can be used.

Server.Cluster.ProbeCount

Number

Number of times that a server completes a probe request of the other cluster members.

|Server.Cluster.ProbeError|Number|Number of times that a server receives an error when probing another server.

Server.Cluster.ProbeTimeout(mins)

Number

Interval at which the intracluster probe or cluster member heartbeat occurs.

|Server.Cluster.Trans.IntervalAvgTime|Number|Average interval time of cluster transactions.

Server.Cluster.Trans.IntervalInMinutes

Number

Interval between cluster transactions.

|Server.Cluster.Trans.IntervalInSeconds|Number|Interval between cluster transactions.

Server.Cluster.Trans.IntervalsUsedInAvg

Number

Current setting for the number of intervals used to capture transaction data used to calculate workload balance.

|Server.Cluster.Trans.LastIntervalAvgTime|Number|Last average interval time of cluster transactions.

Server.Cluster.Trans.NormalizeValue

Number

Current setting of acceptable average transaction time in milliseconds for a server

|Server.Cluster.Trans.RunningAvgTime|Time|Average total running time of cluster transactions.

Server.Cluster.Trans.RunningCount

Number

Number of cluster transactions.

|Server.Cluster.Trans.RunningTime|Time|Total running time of cluster transactions.

Server.Coprocessor

Text

Yes or No, depending on whether the server contains a math coprocessor or is a 486.

|Server.CPU.Count|Number|Count of processors in system.

Server.CPU.Type

Text

Type of system processor, (I.E. 386, 486, Pentium)

|Server.Description|Text|Server's one line description from server's Name & Address book entry.

Server.ElapsedTime

Time

Amount of time since server was restarted.

|Server.Location|Text|Physical location of server.

Server.MailBoxes

Number

Number of mail boxes used by mail server.

|Server.MinIdleDisconnect|Number|Minimum number of minutes for disconnect

Server.MinIdleDisconnect.Time

Time

Time at which minimum number of minutes for disconnect happened

|Server.Monitor.Start|Time|Time at which server monitor started

Server.Name

Text

Server name

|Server.OpenRequest.Maxusers|Number|Open requests for that have reached maximum users

Server.OpenRequest.PreV4Client

Number

Open requests for pre-R4 clients

|Server.OpenRequest.Restricted|Number|Open requests for restricted clients

Server.OpenRequest.V4Client

Number

Open requests for R4 clients

|Server.Path.Data|Text|Server's default data drive and directory

Server.Path.Executable

Text

Location of Notes Executables (e.g. d:&

#92;data)

Server.Path.Swap

Text

Complete path of swap file.

|Server.Ports|Text|Server ports

Server.Ports.RS232

Number

Number of RS232 (serial) ports on the server.

|Server.PoweredBy|Text|Self explanatory.

Server.Sessions.Dropped

Number

Sessions dropped in mid-transaction.

|Server.Task|Text|This statistic appears once for every task running on the server, listing the name of the task and the task status.

Server.Tasks

Number

Number of tasks currently running on the server.

|Server.Time.Start|Time|Time at which server was started

Server.Title

Text

Server title

|Server.Trans.PerMinute|Number|Number of server transactions in the last minute.

Server.Trans.PerMinute.Peak

Number

Highest number of transactions to occur during a one-minute interval.

|Server.Trans.PerMinute.Peak.Time|Time|Time that peak transactions per minute occurred

Server.Trans.Total

Number

Number of transactions processed since server started.

|Server.User|Text|This statistic occurs once for each user, listing the user name, session ID, and the number of databases accessed.

Server.Users

Number

Number of users with open sessions on the server

|Server.Users.1MinPeak|Number|Peak number of users in one minute.

Server.Users.1MinPeakTime

Time

Time when peak users in one minute was reached.

|Server.Users.5MinPeak|Number|Peak number of users in five minutes.

Server.Users.5MinPeakTime

Time

Time when peak users in five minutes was reached.

|Server.Users.Peak|Number|Peak number of concurrent users since server was started

Server.Users.Peak.Time

Time

Time that last peak users occurred

|Server.Version.MTBF|Text|Version of MTBF running on the server

Server.Version.NLM

Text

Version of NetWare running on the server

|Server.Version.Notes|Text|Version of Lotus Notes running on the server

Server.Version.NT

Text

Version of Windows NT running on the server

|Server.Version.OS|Text|Version of OS running on the server

Server.Version.OS2

Text

Version of OS/2 running on the server

|Server.WorkThreads|Number|Maximun number of concurrent transactions to create

Server.

Text

Server access error

|SMTPMTA.ConvFailures|Number|Total SMTP MTA conversion failures.

SMTPMTA.Dead

Number

Dead SMTP MTA messages.

|SMTPMTA.Delivered|Number|Total SMTP MTA messages delivered.

SMTPMTA.HighInBound

Number

Highest number of inbound processes.

|SMTPMTA.HighOutBound|Number|Highest number of outbound processes.

SMTPMTA.InBoundBytes

Number

Total number of bytes inbound.

|SMTPMTA.InBoundSize|Number|Largest message inbound.

SMTPMTA.OutBoundBytes

Number

Total number of bytes outbound.

|SMTPMTA.OutBoundSize|Number|Largest message outbound.

SMTPMTA.TotalRouted

Number

Total SMTP MTA messages routed.

|SMTPMTA.TransFailures|Number|Total SMTP MTA transmission failures.

SMTPMTA.Transfered

Number

Total SMTP MTA messages transfered.

|SMTPMTA.Waiting|Number|Total SMTP MTA messages waiting.

SMTPMTA.WaitingConv

Number

Mail waiting to be converted.

|SMTPMTA.WaitingRecipients|Number|Mail waiting to be delivered.

SMTPMTA.WaitingTrans

Number

Mail waiting to be transfered.

|SMTP.Command.|Text|SMTP command

SMTP.MessagesProcessed

Number

Number of SMTP messages processed

|SMTP.Sessions.Accept.Queue|Number|SMTP listener work queue of incoming sessions to be processed

SMTP.Sessions.Active

Number

Current number SMTP server tasks

|SMTP.Sessions.Inbound.BytesReceived|Number|Total Number of BytesReceived by this SMTP server|;|;|;

SMTP.Sessions.Inbound.BytesSent

Number

Total Number of BytesSent by this SMTP server

SMTP.Sessions.Inbound.Non-SSL

Number

Number of SMTP server inbound TCP connections (non SSL)

|SMTP.Sessions.Inbound.SSL|Number|Number of SMTP server inbound SSL connections

SMTP.Sessions.Inbound.SSL.Bad_Handshake

Number

Number of SMTP server

 SSL Handshake Failures

SMTP.Sessions.Inbound.Total

Number

Total Number of SMTP server inbound connections (SSL & non SSL)

|SMTP.Sessions.Peak|Number|Peak number SMTP server tasks since server startup

SMTP.Sessions.Threads.Busy

Number

Number of SMTP server tasks currently running

|SMTP.Sessions.Threads.Idle|Number|Number of SMTP server tasks currently idle

SMTP.Sessions.Total

Number

Total number SMTP server tasks since server startup

|SMTP..Ave|Number|SMTP average

SMTP..Count

Number

SMTP Count

|SMTP..Max|Number|SMTP maximum

SMTP..Min

Number

SMTP Minimum

|SMTP..Total|Number|SMTP total

SPIN.AvtIterToHit

Number

Average of Spin Lock Iterations to Hits

|SPIN.Delays|Number|Count of Spin Lock Delays

SPIN.DelaysMsecs

Number

SpinLock Delay in msecs

|SPIN.FRWSemGetReadExt|Number|SpinLock FRW semaphore read 

SPIN.FRWSemPutReadExt	Number	SpinLock frw semaphore put
SPIN.Hits	Number	Count of Spin Lock Hits

|SPIN.MaxDelayMask|Number|SpinLock max delay mask

SPIN.MaxDelayMsecs

Number

SpinLock max delay in msecs

|Stats.Time.Current|Time|Time stats package is updated.

Stats.Time.Start

Time

Time stats package was started

|Update.DeferredList|Number|Number of requests for view updating and or full text indexing on the deferred queue (wait 15 minutes before taking action.)

Update.DeferredList.Duplicates

Number

Number of requests

 for view updating and or full text indexing avoided because they were already waiting on the deferred queue (wait 15 minutes before taking action.)

Update.DeferredList.Max

Number

Maximum number of requests waiting for view updating and or full text indexing on the deferred queue (wait 15 minutes before taking action.)

|Update.DeferredList.Processed.AllViews|Number|Number of all view updates processed from the deferred queue (wait 15 minutes before taking action.)

Update.DeferredList.Processed.Compactions

Number

Number of compactions processed from the deferred queue (wait 15 minutes before taking action.)

|Update.DeferredList.Processed.SingleViews|Number|Number of single view updates processed from the deferred queue (wait 15 minutes before taking action.)

Update.FullTextList

Number

Number of requests on the full text index queue.

|Update.FullTextList.Duplicates|Number|Number of requests for full text indexing avoided because they were waiting on the full text index queue.

Update.FullTextList.Max

Number

Maximum number of requests waiting for full text indexing.

|Update.FullTextList.Processed|Number|Number of full text indexing requests processed.

Update.NAB.Updates

Number

Number of Domino Directory view updates processed.

|Update.PendingList.Processed.AllViews|Number|Number of all view updates processed from the immediate queue.

Update.PendingList.Processed.Compactions

Number

Number of compactions processed from the immediate queue.

|Update.PendingList.Processed.SingleView|Number|Number of single view updates processed from the immediate queue.

Web.Retriever.Access.FTP

Number

Number of FTP retriever accesses.

|Web.Retriever.Access.Gopher|Number|Number of Gopher retriever accesses.

Web.Retriever.Access.HTTP

Number

Number of HTTP retriever accesses.

|Web.Retriever.Bytes.Received|Number|Number of retriever bytes recieved.

Web.Retriever.Bytes.Sent

Number

Number of retriever bytes sent.

|Web.Retriever.ImageCache.Hits|Number|Number of successful accesses on retriever image cache.

Web.Retriever.ImageCache.Misses

Number

Number of unsuccessful accesses on retriever image cache.

|Web.Retriever.LogLevel|Text|Web retriever logging Level

Web.Retriever.LogMessages

Text

Web retriever logging messages? (Yes/No)

|Web.Retriever.Process.Access.FTP|Number|Number of retriever process FTP accesses

Web.Retriever.Process.Access.Gopher

Number

Number of retriever process Gopher accesses

|Web.Retriever.Process.Access.HTTP|Number|Number of retriever process HTTP accesses 

Web.Retriever.Process.Bytes.Received	Number	Number of bytes received by retriever process
Web.Retriever.Process.Bytes.Sent	Number	Number of bytes sent by retriever process

|Web.Retriever.Process.Num.Active|Number|Number of active retriever processes.

Web.Retriever.Process.Num.Busy

Number

Number of busy retriever processes.

|Web.Retriever.Process.Num.Idle|Number|Number of idle retriever processes.

Web.Retriever.Process.Num.Maximum

Number

Maximum number of retriever processes.

|Web.Retriever.Process.ProcessID|Number|Process id number

Web.Retriever.Process.State

Text

State of retriever processes.

|Web.Retriever.Process.URLs.Failed|Number|Number of failed retriever process URLs

Web.Retriever.Process.URLs.Requested

Number

Number of requested

 retriever process URLs.

Web.Retriever.Process.URLs.Succeeded

Number

Number of successful retriever process URLs

|Web.Retriever.Time.Current|Text|Current time.

Web.Retriever.Time.Duration

Text

Elapsed time since retriever started.

|Web.Retriever.Time.Start|Text|Time retriever started.

Web.Retriever.URLs.Failed

Number

Number of retriever URL

's that have failed.

Web.Retriever.URLs.Requested

Number

Number of retriever URL

's that have been requested.

Web.Retriever.URLs.Succeeded

Number

Number of retriever URL

's that have been succesfully accessed.

Web.Retriever.Version

Text

Web retriever version.

|Web.Retriever.VPOOL.Max.Buf|Number|Number of buffer VPOOL's which have reached maximum size.

Web.Retriever.VPOOL.Max.Element

Number

Number of element VPOOL

's which have reached maximum size.

Web.Retriever.VPOOL.Max.Marker

Number

Number of marker VPOOL

's which have reached maximum size.

Web.Retriever.VPOOL.Max.Text

Number

Number of text VPOOL

's which have reached maximum size.

Web.Retriever.VPOOL.Max.URL

Number

Number of URL VPOOL

's which have reached maximum size.

XPC.COM1.Errors.CRC

Number

Number of CRC errors on serial port.

|XPC.COM1.Errors.Port|Number|Number of port errors on serial port.

XPC.COM1.Errors.RetransmittedPackets

Number

Number of retransmitted packets on serial port.

|XPC.COM1.Sessions.Active|Number|Number of active sessions on serial port.

XPC.COM1.Speed.Carrier

Number

Carrier speed on serial port.

|XPC.COM1.Speed.Port|Number|Port speed of serial port.

XPC.COM1.Status

Text

Status of serial port.

|XPC.COM1.UserBytes.Received|Number|Number of user bytes received on serial port.

XPC.COM1.UserBytes.Sent

Number

Number of user bytes sent on serial port.

|XPC.COM1.UserMsgs.Received|Number|Number of user messages received on serial port.

XPC.COM1.UserMsgs.Sent

Number

Number of user messages sent on serial port.

|XPC.COM2.Errors.CRC|Number|Number of CRC errors on serial port.

XPC.COM2.Errors.Port

Number

Number of port errors on serial port.

|XPC.COM2.Errors.RetransmittedPackets|Number|Number of retransmitted packets on serial port.

XPC.COM2.Sessions.Active

Number

Number of active sessions on serial port.

|XPC.COM2.Speed.Carrier|Number|Carrier speed on serial port.

XPC.COM2.Speed.Port

Number

Port speed of serial port.

|XPC.COM2.Status|Text|Status of serial port.

XPC.COM2.UserBytes.Received

Number

Number of user bytes received on serial port.

|XPC.COM2.UserBytes.Sent|Number|Number of user bytes sent on serial port.

XPC.COM2.UserMsgs.Received

Number

Number of user messages received on serial port.

|XPC.COM2.UserMsgs.Sent|Number|Number of user messages sent on serial port.

XPC.COM3.Errors.CRC

Number

Number of CRC errors on serial port.

|XPC.COM3.Errors.Port|Number|Number of port errors on serial port.

XPC.COM3.Errors.RetransmittedPackets

Number

Number of retransmitted packets on serial port.

|XPC.COM3.Sessions.Active|Number|Number of active sessions on serial port.

XPC.COM3.Speed.Carrier

Number

Carrier speed on serial port.

|XPC.COM3.Speed.Port|Number|Port speed of serial port.

XPC.COM3.Status

Text

Status of serial port.

|XPC.COM3.UserBytes.Received|Number|Number of user bytes received on serial port.

XPC.COM3.UserBytes.Sent

Number

Number of user bytes sent on serial port.

|XPC.COM3.UserMsgs.Received|Number|Number of user messages received on serial port.

XPC.COM3.UserMsgs.Sent

Number

Number of user messages sent on serial port.

|XPC.COM4.Errors.CRC|Number|Number of CRC errors on serial port.

XPC.COM4.Errors.Port

Number

Number of port errors on serial port.

|XPC.COM4.Errors.RetransmittedPackets|Number|Number of retransmitted packets on serial port.

XPC.COM4.Sessions.Active

Number

Number of active sessions on serial port.

|XPC.COM4.Speed.Carrier|Number|Carrier speed on serial port.

XPC.COM4.Speed.Port

Number

Port speed of serial port.

|XPC.COM4.Status|Text|Status of serial port.

XPC.COM4.UserBytes.Received

Number

Number of user bytes received on serial port.

|XPC.COM4.UserBytes.Sent|Number|Number of user bytes sent on serial port.

XPC.COM4.UserMsgs.Received

Number

Number of user messages received on serial port.

|XPC.COM4.UserMsgs.Sent|Number|Number of user messages sent on serial port.

XPC.COM5.Errors.CRC

Number

Number of CRC errors on serial port.

|XPC.COM5.Errors.Port|Number|Number of port errors on serial port.

XPC.COM5.Errors.RetransmittedPackets

Number

Number of retransmitted packets on serial port.

|XPC.COM5.Sessions.Active|Number|Number of active sessions on serial port.

XPC.COM5.Speed.Carrier

Number

Carrier speed on serial port.

|XPC.COM5.Speed.Port|Number|Port speed of serial port.

XPC.COM5.Status

Text

Status of serial port.

|XPC.COM5.UserBytes.Received|Number|Number of user bytes received on serial port.

XPC.COM5.UserBytes.Sent

Number

Number of user bytes sent on serial port.

|XPC.COM5.UserMsgs.Received|Number|Number of user messages received on serial port.

XPC.COM5.UserMsgs.Sent

Number

Number of user messages sent on serial port.

|XPC..Errors.CRC|Number|Number of CRC errors on serial port.

XPC..Errors.Port

Number

Number of port errors on serial port.

|XPC..Errors.RetransmittedPackets|Number|Number of retransmitted packets on serial port.

XPC..Sessions.Active

Number

Number of active sessions on serial port.

|XPC..Speed.Carrier|Number|Carrier speed on serial port.

XPC..Speed.Port

Number

Port speed of serial port.

|XPC..Status|Text|Status of serial port.

XPC..UserBytes.Received

Number

Number of user bytes received on serial port.

|XPC..UserBytes.Sent|Number|Number of user bytes sent on serial port.

XPC..UserMsgs.Received

Number

Number of user messages received on serial port.

|XPC..UserMsgs.Sent|Number|Number of user messages sent on serial port.